Viewing all customer Discussions for:

39-083 Dual Arm Crank, 21-1/2"

Here is a pic of my window crank. How do I determine make and model?

The threads on the crank mechanism are stripped out. The numbers in the corner of the window glass are: IGCC CBA IGMAC CIG-3 3-96

I need a repair kit for cranks on vinyl windows .

The photos above show the "ring nut" that does not stay in place when I crank the window closed. The crank "driver" mechanism (photo 1) is held in place using this "ring nut" screwed securely into the crank fitting (photo 5) to hold it snuggly in place (photo 4). Since the ring nut is old and threa ... (cont.)

How much for this window crank? Looks like part number 30895A.

need new operators for these 2 awning windows, handles and shafts missing. Home was built in 1990. many other casements also have stripped knurled sleeves and the worm drive retract when closing the windows. Can I get some pricing on these replacement parts? Thank you Scott

Operator is stripped It measures 5" inside

Hi- my daughter purchased a house recently and one of the awning window operators is shot. I can't identify the window manufacturer or the operating hardware- no markings though they may be on the underside and I'd have to remove it to see. Whether it is Truth or other, I need to find a suitable ... (cont.)

it made by truth

I need new crank mechanism for this awning window, please advise whatcha part to order,Thank you,Jason

Hello I need parts for this window. Can you identify the maker by these pictures? I need the scissors opening mechanisms

I tried really hard to read the numbering I tried to take a picture of all I can tell is it seems to say the word Canada and a four digit number with 18 in it

1 x Peachtree Ariel Awning Window Crank Handle SKU: 35570334 2 x Peachtree Ariel Awning Window Sash Operators SKU: #35570355/ #35570350 Size: a. 29-120-2 (fits 36"/42"/48" sizes, not handed) Color: Driftwood 1 x Peachtree Ariel Awning Window Sash Operator arms measure 25" when fully retracted. f ... (cont.)

I need to replace the operator on a couple awning windows. The photos show the operator installed. Each section of the crank arms are approximately 9" long. The windows were purchased through Sears about 37 years ago. In looking at your awning window hardware on your website I found PN 39-0837. ... (cont.)

Ideally, looking for a replacement threaded worm gear or complete assembly if available...see attached photos.

Hello, I have added pictures of the parts I need but once I add them, I cannot seem to get back to this webpage. If you could send me an email, I could send you pictures of what I need. This is for a casement window and the casing I believe needs to be replaced because the threads that the crank mec ... (cont.)

This gear doesn't work anymore. When I try to close the window, the whole gear backs out and doesn't operate the window. Can I replace it? Or should I replace the whole operator? 25 year old aluminum clad window

Hello, I'm looking for help identifying this. It's about 10-11 inches fully extended. Do you have this part?

#0490 is how the mechanism attached to the window #448 & #449 how the Mechanism attaches to the window frame Crank broke away from the mechanism Thank you

Not sure the make. It measure about 21 across the arms when closed. The handle opening is 5" x 7/8". It is white center mounted crank. They window is about 15" x 36"w ....opening about 8-9 normally.