Viewing all customer Discussions for:

Door & Window

Hi - my skylight has 2 of the subject motors, which were made in 2002, each with a rated lifting capacity of 70 lbs. Skylight no longer operates, and an electrician told me that the motors are getting power, but they must be dead. They stopped working suddenly during a recent roof replacement, but ... (cont.)

Length: 3.0 inches Width: 0.75 inches Height: 1.5 inches

Hello I need a screen door. It is about 77.5 high and 36 wide. This is the best I could find. I google lense the stickers. Thanks

Hi, I don't have any photos, only a couple of stripped down sashes without balances. You can kinda see the imprint of the old balance in the paint against the jamb. I need help choosing the correct sizes. The sash measures 22.75" tall and weighs 10.45lbs. The channel for the balance is 1/2". Hope ... (cont.)

jealousies window crack with a small T handle only

The number on the balancers is 31 9. I believe this is a Milgard window

Unable to provide part installed. Thanks

Vinyl door handle came loose and cannot screw back on need to find out which door handle to buy to replace Simonton 7300 patio door

Sliding door secondary limiter. I am looking for color ebony.

Hi, this window Tilt Latch is from an Alcoa Vinyl window mid 1990's. You have a number of options and wasn't sure which is the better fit. I would need both right and left options.

I need to replace one or more of these crank arm assemblies if possible

Number on part is 20-4 FA5 CMC 9, it looks to be 3/8 wide and 21 inches long.

I ordered #38-144 but the inside is not the same as the one I am trying to replace. The 38-170, mentioned by a Swisco rep, is very close to what I need. The difference is the pin. The one I have does not have gears or those gogs. I think if I can replace the plastic piece which I think it's called t ... (cont.)

The whole part is about 3-1/8th inch up and down and 1-1/2 inches wide. It's an old garage window that opens inward awning style but without the mechanism.

Hi - thank you for your help, I couldn't quite match these up based on the photos. Metal channel length is 23", the stamp shows 22 D. If you have these available I would need 4 of them. thank you Shawn

Need 10 white latches to replace on my windows

Hi, Company is our of business. The spring is 12 1/2 " Do you have something that will work? Thank you, Annette

Let me know if there is anything else I can do to assist you.

Hi,My patio door hardware looks like your 82-080 except the 4 15/16 dimension is closer to 4 7/8". It is marked made in New Zealand. The problem is only the anti-slam feature is unreliable. Pushing the button in does not always enable the latch mechanism. Adjusting the screw does not help. It d ... (cont.)

This door is SGD-R30-120x82. I don't see a mfgr name, the sticker reads Malibu XO Narrow StileI need to replace the mechanismMarc