Viewing all customer Discussions for:

Door & Window

I need to replace these tilt latches. It appears they need to be attached with 2 screws? Thanks for your help

Have Anderson double hung and need sash balances for them

27" long

Hello. Above shows the latch not installed; in closed and open position.The second photo shows the latch installed.How am I supposed to remove the broken/inoperative latches without damaging the window sash?Thank you,Richard Troy, NY

I need a 4 hinge kit

Looking for something similar that will fit my window. previously purchased #26-155, which is about the same width as the whole setup pictured, but wider than the moving portion of the latch in the photo.

Ppg Herculite K HP Tempered Safety Glass CGSB12GP1 16CFR1201. C11 ANSI Z97.1-1984 1/8"U SGCC.1605 3404

I need a casement window operator Truth 41012

I am looking for a replacement door roller for this older door closet. Also looking for the track.

Need help identifyingThis window or stash clip when I go to take the window out to change the springs I have to take these clips out of the edge of the window

Single hung Simonton windows in my house are from 2004. Some of the windows are very hard to close. Some of the latches on top of the windows have also broken. Which teed spring do I need for replacement. I have attached a picture of the label of the window, teed spring and latch. ... (cont.)

need replacement, model #: OP06-1526 please & thank you!

Hello, I have some pretty old Andersen casement windows, right and left. The rest of the windows were replaced but this original is still in good shape except for the hardware House was built in 40s, so these are probably early models. Is this enough to tell me what I need?

The interior handle has broken as you can see in the picture. Would love a replacement.

I have a bunch of windows with broken balances. Mostly it's the plastic clips that are broken, but in some cases the channels are bent and pins broken. I want to replace them all (7 windows total). The existing balances are 1/2" wide and have 28c written on them. Can you advise what product I need t ... (cont.)

Thanks!

I have 12 aluminum s ingle plane windows. I'd like to get guidance on repairing/refurbishing them to avoid the cost of replacing all of them. I'm interested in attempting to replace everything on one of them first and provided that I can get it in proper working condition then id order everything ... (cont.)

I have heard from a neighbor that these are patriot windows distributed by universal that are wooden double hung compression tilt in windows. Would like to find replacement parts. Windows are probably from the late 80's. Please pardon the cob webs Thank you, The Smiths

The window opens without a problem by pushing the glass, but the crank is no longer attached. See the photos; the photo with the metal cover over the mechanism is from another window by the same manufacturer. I believe the manufacturer was Weather Shield. What part do we need? Thank you,Nancy ... (cont.)

Certainteed Vinyl replacement window