Viewing all customer Discussions for:

Door & Window

Looking for one of these. The recessed handle on my sliders.

I NEED HELO FINDING A DOUBLE CLOSER ABOUT 11 INCHES LONG. IT IS CRANKED SHUT BY TRUTH HANDLE IN PICTURE.

I need a window balancer. I ordered these parts before. I believe it is S160-9, 15-199, and 15-150S. the window is 23.9 pounds.

Hello. This part is to a garden window crank out. It is the part that holds the two arms. The black plastic piece broke that sits in the metal cradle piece. I cannot find a name on the window. Thank you for your help. ~John

I believe these are Atrium windows from around 2010. Both balancers' cord broke. They are 16" long with 16C BSI marked on one side. I don't find a balance that mounts with a "peg" like these do. Hopefully you can help. Thanks

The window is 38" wide x 32' high and weighs 31 lbs. The spring is 1/2" wide. There is a plastic carrier with 3 balance springs on each side. IMG_4314 shows markings on spring. They are partially worn off. I could find no springs where some numbers were not worn off. These are supposed to be Milgard ... (cont.)

Need a window retainer / glazing for a GA window as it appears to be missing. Length is 45 inches.

I have 3 double hung non tilting wood windows in a residential building from the 1920 ( windows are possibly from the 1950's) that need replacement spring balances. They were fitted with caldwell spring balances. The metal tunnels that hold the spring balances are 79" long - I think I need 5/8" bala ... (cont.)

Hello, The width measures 1/2-9/16 inch, and the length of the channel is 21 inches.

Need crank replacement Truth #31858 24" casement window by viwinco

Can you please help me identify this part I'm going to Pair it with a 29 inch series 380 channel balance

Looking for a replacement of a sliding door handle with part number DR05-1540

Hi Swisco, The photos are the left, right and front face of the coil system I currently have. The bottom white part is also broken on both sides, so probably need a full replacement. Please help me in Identifying the correct part numbers. Thank you, Prasad

Hi there We just pulled these out of our window as we couldn't close it anymore. I, unfortunately, didn't take any photos of them IN the window. The metal frame is almost exactly 28" long and the only markings I can find are "2740 BSI OF" If you need any more info please let me know. Thank you! ... (cont.)

The code appears to read 2794 p 27 1075

The part 82-093 doesn't fit the locking mechanism it's too low Can you advise which door handle I need because I have 2 that don't work

Channel balance is marked 2730T BSI I measures 28 inches long. Please see photos.

Bearing part on the bottom of window. Fits tube across bottom.

I ordered a latch that was incorrect because I didn't have access to the window. This is the latch I need. If you can identify it, I'll order it. Thank you very much!!

Hello - can you please help me find replacement parts for this window (coil balances)? My phone number is . I am the homeowner, but I have a window repair guy to do the installation. His name is Elvin . Thanks!