Viewing all customer Discussions for:

Door & Window

The balance is 18 inch long and the pivot are in the picture

Hardware for screen door and gasket for sliding glass door.Dale is my name

As seems common, my channel balance string broke. I'd like to replace the balance and have a couple of spares on hand too. The number on my balance is "26 3 DX CMC 7". There are no other markings on it. The metal channel measures exactly 27 inches in length.

Also need pivot 3inch t shaped with two holes

Need 2 new parts, but unsure of the Series number to order. Thanks for the help

We have submitted picture of tilt in latch. Both left & right sided. The serial number of Paradigm window is 129069 020. We need a part number please. Thank you

Hello, I have two shower part inquires. Please let me know if you offer the following parts or viable alternatives. 1. Clear Vinyl T Wipe / Sweep Measuring 7/32 x 11/32 x 67 Long. Pic Attached, Framed Shower door seal, channel insert (7/32). 2. Polished Brass, Shower Door Drip edge. Pic Attach ... (cont.)

Hello SWISCO Expert, My windows were installed 12 years ago and the coil springs have broken. Markings are PAT.#5.704.165 and 530. Hand written on the side is 7. The sash window weighs 5.5kg The width is 32mm, length is 70mm, and the depth is 13mm. I'm interested in buying 4 units to repair the wind ... (cont.)

hi, I need to replace these channel balances. They're from a Milgard brand window. they're 21" long. thanks!

What is the difference if any between the tilt latch 26-393 and 26-293B? Thanks Chris

Please let me know this or a comparable part is available. Thanks

I need one or two door handle assemblies for our sliding doors. Do you have this style? If so, what is the part number, description and price?

Hello, Looking to replace beige window locks with white locks.

I am looking to replace roller brackets, guides and hinges on my Scheirich kitchen cabinets. Roller brackets have part # listed as 15000-7 & 8, roller guides are 15000-1 &2. Could not figure out part # for hinges. Can you help identify replacement parts? I have 7 drawers so need seven sets of right ... (cont.)

Tryin to open or lock from outside the door but I lost the key

Need crank opener

This is the crank that is on my small bathtub, shower window in one of my apartments. I'm not exactly sure when the building was built, but I do know there is a pink tub and sink in one of the apartments which indicates to me it was built 50s to 60

I need a replacement handle and mortice (including lock and key) for my Milgard sliding glass door. Original was bought around year 2000 ? The pictures show a non-Milgard replacement handle, but would prefer a Milgard original if available. In white as shown to match door. Please let me know if you ... (cont.)

Stamped: a 11-1, 12in length, 1/2in width

The part I need has these numbers on it, 20810, 30841L. What is your replacement part for this? I included a picture.