Viewing all customer Discussions for:

Door & Window

Hello! These are the parts I need. So, I need you to give me the number of these pieces so that I don't buy the wrong one. I will need 10 white pieces from each unit, with the exception of the piece in Photo 5 (4 pieces + screws). These are the numbers I can see: Photo 1: I 11079 PAT. 4824154. On ... (cont.)

Looking for 0C5Y00P0

1/2 channel x 26

Suburban ranch house built in 1958. Pella awning-type casement windows all around. Sash is 29-1/2 x 42 in. The part I need is shown in the attached photo. The hinge arm assembly has two parts. The portion I need includes the brass slider (shown enlarged), left side when facing the window from the ou ... (cont.)

We have Jeld Wen double hung, I believe, residential windows installed in 2013. This is a triple window in family room. The cable and hardware to this window is missing on both ends I guess since we took possession of this home 2 years ago. We noticed this upon cleaning all windows. Maybe I can r ... (cont.)

I need to replace the nesting crank on my casement bow window. The only marking I found was on the operator & its a Truth. I counted the splines(?)/notches/ridges (not sure what they are called). There are 12 on the base & 10 on the handle itself. The opening on the crank is 5/16" and the b ... (cont.)

Original door installed in 2002. Frame has a tag: AAMA certification series 2000/930, SGD-R20-144X96, SGD-R40-144X80. Need 2 rollers

Window channel balance 25 in Long half inch wide and the number 2420

Can you please let me know if you have this, and the part # and amount. And appx. how long will take to come in once I place an order?this is 36" long

window tilt latch looks just like your part # 26-244 or 26-243 but is smaller (shorter). I am attaching pictures. We have many houses in our Resort that were built around the same time by the same builder so may be a popular item here. Can you help?

I need a pair of roller for a window 4' X4' about 12yrs old. Have 4 windows if this works

Need to replace broken cap or assembly on metal bifold door. Mirrored door

13 45054 is stamped on the underside. I am looking for a thumb crank replacement for these.

This is an Andersen Casement. Window is out of track. Need new parts.Mark

while replacing the sash balancers i noticed the piece that holds the connector in place was missing in several windows I looked through the online catalog but could not find, hoping you sell these photo attached

Im looking for 2 5/8x 5/8 replacements for left and right side of window.

Looking for replacement parts for these

These are the window boxes that control the cord for raising and lowering. I need 6 of them.

The wooden-framed screen is mounted from the outside. Metal strips are installed vertically on the inside of the window frame, and when the screen is put in place the rotating metal pieces on the screen can be turned so they fall to the inside of the vertical strip. There is one on each side (left a ... (cont.)

Looken for replacment wheels