Viewing all customer Discussions for:

Door & Window

looking for replacement latch assembly for Anderson Forever storm door. I see your post that it's an old door but I hope you can help. Thank you, Scott see pic below

Could you pleas assist in identifying the correct window pivot shoe? I think I also need a track spreader because there is no access gap in the track. Thank you!

c-9400-1 (front) f-9400-8 b (back) the window is on the right side and opens to the right

Below, you will see a picture of our storm door handle taken apart.The very small latch piece above the handle is what has broken. You can see the tiny L section that has fallen off. There were also some small pieces of coil/wire that were also loose when I opened up the handle. I'm thinking all w ... (cont.)

I have sling glass doors which need replacement wheels. So far we see two different manufacturers markings:Disco 2189 andD1589Can't find them no whereMy husband said these are the dimensions3 2/16 × 1 9/16

I have 4 windows which need new Pivot Bars. It appears that the bars are held in place with, what appears to be 2 rivets. The picture shows the rivet that was removed from the pivot bar in the picture. Can the rivet be replaces with a screw

Please tell me which one should I order.

Hi, I need 6 of the yellow one, which is 37 inches And 2 of the orange one, which is 25 inches please. And I need 2 of each the pivet shoe comes with them please Thank you.

I was referred by the Weathervane window company to you. I need to replace the part to which I have attached the photo for my window lock. I need 11 pcs in white. Please let me know if you carry them and or refer me to whom it does.Best Ira

These parts are damaged or missing. It is a Pella window. One pin is missing that fits into the slider that holds the window up. The 2nd image is the pin on the other side. The 1st image is where the pin should be. The 3rd image is the slot where the pin fits into. Notice that the slot is damaged. ... (cont.)

I just bought this house and it has several of these casement windows but the teeth are stripped on several of them so I would like to replace them.

Good day! I am trying to replace a few locks and crank handles on my newly existing window. Everything operates fine but there is some wear and tear I had from pets and would like to try to replace to as close as possible to the preexisting size and style. I will attach some photos I've taken as wel ... (cont.)

We need the part the the spiral balance attaches to on lower sash and the slide retainer on the top of the lower sash the retains the tilt in windo

I'm not sure how exactly to measure the length. Is it the external plastic tube or the internal metal tube? Also my diameter is 1/2 inch. Would you recommend the 3/8 in or the 5/8 as a replacement? Finally can you confirm if the tip is actually blue and not green? Thanks

I can't find these screen corners locally. Thanks for the help. Kevin

THIS IS A LOCK FOR A SINGLE HUNG WINDOW I AM WONDERING IF YOU HAVE ANYTHING THAT WOULD MATCH

Silverline (label in photos) of door handle is loose, cracked and bottom bolt thing is pulled thru on outside.

I found out that Anderson is no longer affiliated with Silverline windows. Silverline said that they don't supply parts to individuals and to contact you. Can you please let me know if you supply this part and the cost per part.

My home was built in 1974. The rollers need replaced but there are no markings or part numbers. The contractor is Le Beau. Please advise on what part numbers to order. Thank you.

Window lock broke