Viewing all customer Discussions for:

Door & Window

I had this boot break when replacing the pivot bars in my window.

Hello, I would like to replace several casement operators and hinges which where originally installed with Milgard windows. I would appreciate your suggestions as to what I may use to complete this task. Thank you. Mike

This part hols the glass in place

Looking for bubble weather stripping for a Pella Patio Door circa 2001. the weather stripping installs in a kerf and is 1/2" height to bubble and the bubble has a 1/2" diameter. I need enough for 3 doors2) 78" height x 28" wide1) 78" height x 34" wideThank youCarl

The pivot bar fit great in the window...but I'm noticing now that it doesn't fit in the shoe correctly since it is a different shape than the simonton original pivot bar (there is a ridge before the end). It essentially creates a gap between the window at the casing when the pivot bar is going into ... (cont.)

Looking for the key lock for Acorn patio door

The lock snib broke on our Milgard Essence sliding door, and since the finish on the inside handle has worn off over the years, we were thinking about replacing the entire handle.Is this handle set compatible with a Milgard Essence sliding door? The dimensions match exactly, and I've attached a phot ... (cont.)

Coil springs eventually snap after usage. There is no brand name on these windows. The only numbers I can find on a sticker are the ones in the photo.. do your best. I appreciate your help. Thank you

We need two of these rollers for a patio door. Can you help?

Per conversation this AM with one of your reps it was suggested that I send you pictures of the item I am looking for. Attached find 3 pictures of the subject retainer strip. I believe it is a vinyl material and is 38.5" long. It holds either the glass or screen panel in the upper part of a 30" w ... (cont.)

Original to 1970 house I believe. Crank handle is loose inside unit and will not screw back in, just loose. Windows don't open.

I need to replace the simonton window balance for the lower window panel, see attached photosmy name:Ivan

need to make handle usuable and need a screen

Unsure of model or year (another window from same era shows "Series 151 on the NAMI sticker). Need a shoe and 2 spiral balances and need to identify which replacement part would fit. Spiral balance Length: 29" Tube diameter: 1/2 or 5/8 (a bit deformed) Color: see picture

Kitchen cabinets are wellborn brand. The right back hanging slide bracket broke. It looks like there is a right and left bracket model because of the opening to insert the bracket. Can you recommend a replacement part? Thankyou, Mark

Hi Experts, We are looking for the correct replacement of the window balance. Mine is 1/2 width and I put S385 2950 AND S385 2650 in my carts and want to double check with you if it is correct. Another thing is does it come with the Shoe? if not could you help provide the correct shoe I should buy ... (cont.)

I need to purchase replacement window tilt latches. To me, these latches appear to have very similar dimensions to your product code 26-420, except that the top part of the latch is rounded instead of rectangular. I believe the window manufacturer is Comfort World which is printed on the window lock ... (cont.)

Need replacement for 2 doors.. is it possible to get them keyed alike?

Need help figuring out what length to order I have a 22 1/8 bottom sash and a 21 /18 upper sash

There is no mention of the material this replacement part is made of... Interested in the stone color...