Viewing all customer Discussions for:

Door & Window

Look to replace balance and acessories

Need 3 right handle and 2 left. Do you have this type? See photo

I would also like to get pivot bars and coil springs that goes with this part

The house (and window hardware) is 23 years old. The window balances are failing per the attached pictures. One window in particular had both balances fail and I would like to replace both balances. Plastic clips are broken and the springs are rusty. The weight of the window is 15.6 pounds, it i ... (cont.)

Do I need to remove the door and take a pic of the bottom? Or is this enough to identify which filters I need?

Hi I have this handle from TRUTH with number 5560082 on it, what's the best to replace it? Thanks.

the coil balance has 7BB on it... 7lbs? I don't see an exact match for this pivot shoe on your site, but is there something that will work? thanks, Tom

Looking for an outside plate for an Anderson sliding door.

cant seem to find this part on your website. piece you see is about 1.25" long and has snapped at a threaded position of which the remaining inch or so is still in window held by two screws do you carry these? Thanks

I have Milgard Windows and have two channels on both sides of the up sliding window. I need two pairs of channels to replace the channels in two windows. (total 4 pieces). The length of the Channel is 19 5/8". I will attach pictures of the channels end pieces, clip and numbers that are on the Ch ... (cont.)

Hi Swisco,I want to repair the locking mechanism on this old Roto White 30 x 42 Casement Window. I need to know which tie bar and tie bars to purchase from you. Thank you!Sincerely,Chris

Milgard said my part number is VA0210HHGBBL. The closest I can find in your parts is 55-195. Is this a suitable substitute? If not is there a better substitute?The photo is a cross section of the glazing bead that I cut from a piece that is falling out. As you can see, the bead has collapsed, an ... (cont.)

fibrelux casement operator

Hello SWISCO experts! I am hoping to replace my current crank and cover with a lower profile option. The arm operator is stamped Truth EntryGard and 6200. The part connected to the bottom of the window frame is stamped 45273. Would the Truth Folding Handle and Cover Kit (39-107FK) work without rep ... (cont.)

need left and right 13-1/2" wright 7701 replacent handles arms and gear..

I need a 2 latches and one plastic slider part for one of my windows. I've attached pictures of the tag on the window and the parts I need to replace. Is this enough information to provide me the exact part numbers? Thanks.

Are you able to punch out the center hole for the lock?

Only locked inside-no out door mechanism

The bracket is for the back of a kitchen drawer and only has rectangular opening

I like to replace my old patio door handle but I'm not sure what model t get home depot did not have this type just need to no type name or model # to purchase few of them.