Viewing all customer Discussions for:

Door & Window

I am looking for some weather shield window and door hardware replacement parts. These are the original windows from the late 90 early 2000 built house. this home has over 100 windows and 9 doors.

Hello,As you can see in the last picture of my double hung window coil balance, the pivot lock shoe has retracted back to the coil balance and even when turning the metal cam to slide the shoe down the track it retracts right back up. I originally began this project with the thought that I only had ... (cont.)

Trying to identify an older operator for an awning window. Probably from the 1970's. Distance between the bottom two holes appears to be 1 1/8". Distance between top and bottom holes appears to be 5 1/4". Diameter of the hole in the control arm appears to be 3/8" and the arm has a curve near the mi ... (cont.)

34C BS1 78 number on metal, 34 3/4 total length 20 inch spring

I need ten 1420 balancers and four 2020 balancers. Can you help me placing order. Thanks

See picture for description dimensions and weight of sash. No numbers but found warranty page in documentation. Not sure if that's the same window. I need a new coil spring assembly for the left side facing out. Please provide the right part number for the replacement. Thank you,Terry ... (cont.)

the shoe where the pin sits on the balance is broken. looking to replace. would like multiple replacements

I need to replace the sash balance 1027 in anderson 200 narroline winder. Do you have them in stock?

latch requires recessed screws (i can use existing screws) the upper sash screw holder is designed so the screws are at a slight angle.

I need replacement parts for my casement window. Hinges, stud bracket, track, and the clips that hold the locking bar in the frame. I don't know who manufactured my window so I'm seeking help with that. Thank you!

I have a Window World part that has a broken metal piece where the pin from the window slides in. There is a sticker in the window track that shows Series 1555 window. Do you have a replacement and how do you change it? Thanks, Kevin The attached photo shows the broken piece where the window pin goe ... (cont.)

Looking for this window lock see photo

Current window crank is Truth brand 45142

Hi this part is not working. It will not open and close the window anymore. Please let me know if I can get a replacement. Thanks you, Eddie

Bottom was bent causing the window not to be able to close properly

Removed from sliding glass vinyl patio door. Unable to locate at local hardware stores.

HELLO DO YOU HAVE ADA OPERATORS FOR DOUBLE HUNG AND SINGLE HUNG ?

I'm in need of this pivot pin for a window as shown on pictured label. Do you carry this item and if so , please let me know how I can order it. Thanks so much

I think the arm won't stay secure because the plastic guides are broken? I also need new cranks bc the old ones are stripped. Can you help me find the right parts?

I have jeld wen windows and the exterior screens have small spring loaded pegs that is in the frame to hold the screen to the window. The pegs have a plastic head to grab on to. Several of the plastic heads are cracked from sun and heat exposure. Can I get replacement plastic heads? Other sugge ... (cont.)