Viewing all customer Discussions for:

Door & Window

used to hold window that slides I can cut to length and drill the holes 1/4" wide X 3"long X 3/16" deep metal is about 1/16" thick

OP05-7509-03 OPO51505

I need 12 pieces all of the same size. I Thanks David

Hi, I need to replace the lock on a BF Rich patio door. The handle and all hardware is fine. I just need to re-key the lock. Do you have a replacement lock?

Need replacement coil balance for Simonton window,see picture for model sticker. Please confirm which assembly would work with this window. I understand I may need pivot shoe (15-259), coil support (15-255), coil spring (S159), and pivot bar (26-083). Is this correct? My current coil spring does not ... (cont.)

Looking for a part number on this latch, the top one is broken and can't find a replacement

I am looking for replacements, PN might be 2135397

I am looking to replace the small white plastic locking mechanism in my semco window locks.

Hi, there. I have a non-tilt aluminium Milgard sash window and one ofnthe balances went out. The stamp on it is 2390 BSI 26. The length of the metal part is 24". Which part shouldninorser please? Thank you

1. 29-4-CW-CMC-10 (2 sets or 4 pieces) 2. 26-4-EW-CMC-11 (2 sets or 4 pieces) 3. 28-4-EW-CMC-4 (2 sets or 4 pieces) Please send me a quote the above.

They are 29" long width of 3/8 and the window sash weight is 22 lbs. Should I order the red, or green. Also need 4 balancers for a 26" length 3/8 width with 9 lb. Window sash also need 4 window balancer length 29" width 3/8 window sash weighs 25 lb.

Hello I need help finding the right balance. The old balance says it's 1210 and the metal is 12 inches Thank you

Sash o vinyl window is stuck un even & will not move uo/dn sort of rusted.window are 20 years old any link where to buy parts and how to replace instruction appreciate your help.

I purchased a bay window from Win Dor in Feb 2002. The window crank as shown in the picture does not turn left to open the window. It is extremely hard when I attempt to open the window. I have visited Win Dor and they are not sure whether the parts are still available. I visited James Hardware a ... (cont.)

This roller from the bottom of our sliding screen door was broken when our dog ran through the screen door. Can't find a replacement.

Do you have a replacement for my channel balance? Length is 29". I would like to replace both sides. Thanks David

trying to find this part from Wellington windows. This is a pivot park of the window. where it pivots for cleaning. there are 2 per window.

Probable part number caldwell 15 p 170 Metal portion is 33" and 1/2"

26-7/8"?stamp says26 5, bsi 10?Alpine windows.. i need one

Hi there, I'm looking for the coil spring mechanism for a bottom double hung vinyl sash. Thank you