Viewing all customer Discussions for:

Door & Window

Th bulb strip flat aide is 1/4 inch the bulb is about 3/8 inch. Play need the vinyls rail guide it slides jnto

There are four (4) views of the roller that show the dimensions of it. There are two (2) of these rollers on each window. The windows were purchased through Sears years ago. Looking to replace the rollers.

Need to replace 2 - 38" pieces

Customer of ours sent these in and wants to see if she can find a replacement latch for her patio door. It has a slide to latch on the interior and no locking mechanism on the exterior.

These are the correct size and exactly what I needed. Is there a trick to replacing the old ones with the new ones? They sometimes just don't want to push thru the hole. If I try to force - sometimes they bend and become unusable.

Need the kind with the two clips on bottom

Need replacement rollers. Wheel diameter is 1 1/4” diameter. Mounting holes: hold to hole is 5 3/4”. Overall length 6 1/4 inch. Please advise on correct to replacement product. Thank you.

I have a set of 8-10 year old double doors with no markings. The pins on the sliding lock snapped (I assume forced and the pins that lock the door must not have been aligned with the holes in the frame). I need a new lever assembly.

Screen door slider wheels to and bottom

I could not find any information from these windows. There is no label or serial number on the window. We purchased our house in 2007 from Orleans Homes, which later went bankruptcy. There seems no way I can identify the manufacturer of the windows.My old balances are block & tackle rods. Ac ... (cont.)

I am trying to fix my windows. They currently don't stay open when I open them and a handy man mentioned it's a balance system. Most of the windows have had the silver part in the picture snap out or it's missing completely.

Markings: Pe del-mar. Roller size 1 1/4". Mounting from hole to hole is 5 3/4". End to end is 6 1/4". we need replacements- please advice correct replacement. Thanks

Hello, I am looking for Hurd casement replacement parts. The current ones are rusty and crank handle came out of the grid. Its 4 inches wide and 3 3/4 inches at the grid. Can someone help me with correct part? Thank you

Only photo provided by the homeowner. Windows are 15+ years old. Unfortunately and expectedly, no dimensions were provided.

I need replacement crank handle for this casement window. Which one is the best match? thanks

Bought this house with silver line doors. The only marking I can find says 1968. The roller wheel is completely missing and has been used for who knows how long just being jammed across the track with grease. Id lime the correct wheel and keyed handle if possible

Hello the cord broke and need to replace the balancer but I don know which one to select, I took a picture of it to see if you can help me with it thank you johana

I am trying to find replacements wheels for my 8 foot glass patio slider doors. The dimensions are length 2 1/4 inch Height 1 5/8 in Width 7/8 in and wheel diameter is 1 3/4 in This house was built in 1959 in Northern California and ChatGPT seems to think it is from the Arcadia doo ... (cont.)

Attachs to screen and clips to vinyl track.

Mounting holes on window are 2" apart. Same part used on Viking sash and slider windows. Photos