Viewing all customer Discussions for:

Door & Window

Hi I am missing 2 weep hole covers. The slot is 1.25 x 0.1875. I done care if the replacement is an exact match for what I have as long as it fills the existing gap. Thanks, Jamie

What coil can I use to replace this one? Notice it has a little piece of metal that sticks out on the end

I need instructions to install 82-055 : Acorn Sliding Door Handle Set, 3-1/2".

Replacement for door latch 0242-1

need to repace rollers on slidingglass door. I have searched but I do not have any manufacturer info on the sliding door. Do you have these rollers?

Dear Sir or Madam, I'm trying to replace the lock set on my storm door. I have provided photos to assist you in determining my needs. Thank You, Cleveland

Looking for sash bolts for storm door glass frame. Door purchased from Sears in 1991 Model No.656.65111271 Part No. 11372 sold in set 2

81-004 doesn't seem to match. This roller is 1 3/16 tall, the screw hole on top is about 1 1/8 from wheel end to first edge of the screw hole and about 1 3/8 from the other end to that first edge of the hole. The length is about 2 11/16.the width is about 11/16. I'm not sure which measurements are n ... (cont.)

Please review the attached photo. Disregard earlier inquiry and photo. This is clearer picture of what I have. The windows not longer are being held up. I think it is the shoes, one side appears broken. Sincere thanks, Carl

Hello, Do you have a replacement sliding glass door handle with a clamp-style lock, for a 1" width door and 3-15/16" screw spacing?

We need about 24 of these please.

The string that holds the window up on one side has come loose from the guide at the bottom and the spring is spring is sticking up out of the top of the balance frame (see pictures). The balance frame appears to be held in place by a bracket (picture), but when I remove the bracket the balance doe ... (cont.)

The balance looks like series 380. 2940We measured 30 inches long, half inch wide.Other numbers on balance are 24. 4 BS1 TE.What do you experts think?Thanks, Kirk

I need to replace tha plastic retainer part, which has split, or the entire balance. It looks a lot like the series 140 single, but not exactly. Window is 20+ years old.

The piece at the base of the window that inserts into the pivot shoe broke off on both sides. The pivot shoes seem to be fine. Can those two "u" shape posts be replaced?

Panel is 33 1/4 wide and 17 1/2 high . K8 is stamped on the coil. The locking shoe is 1 1/4 wide and 1/2 inch thick.

I am looking for a replacement lock for a 5500 series American Craftsman sliding glass door. It was installed where the latch appears to hook like a hook or an upside down U. All replacements I see have the latch reversed.

Hello I do you have stopper preferably in beige as on the picture?

I have 3 windows with all of the balances long gone. The metal part is 29 inches. They have a number stamped on the bottom starting with 2830 (the two I took out were 28300 and 2830Z

I need a replacement door handle