Viewing all customer Discussions for:

Door & Window

I need the wheel insert for the Mirrored closet door assembly.I don't need the frame around the wheel assembly. It is welded onto the metal frame.Can I purchase these from you?Thank you,Kim

I need to replace the patio door lock pictured here. What is the correct part to order?

I'm meeting replacement parts on the spiral balance and the pivot lock shoe. I've had no luck locally. And these are tilt windows. I'm needing to get these replaced so the apartments will pass City inspection.

It is 6 inches in height. Gold in color.Thank You, Barbara

Thumb button actuator and shoe as seen in images. Not sure the brand, see no identifying numbers. Window guy told us should be easy to find on-line and replace ... so far as my 3 hour search says he is wrong lol! This product you have 26-312 looks like it may work but according to my notes (as see ... (cont.)

I need this part

I ordered replacement parts on August 31. The order number is 1107711. I am having problems with the installation. I am attaching some pictures to help me discuss this with someone at your company. I can telephone you when you have available time. In the first 2 pictures are the stainless steel ... (cont.)

Early 80's home, white glazing. I sampled another supplier with similar dimension but was a thicker material which did not fit. This thinner material is much more flexible.Any matches? Thanks for your help. Darren

A neighbor has a broken Cmech inside storm door handle, looking for a replacement

Hello, I have the same King Glass doors. I am attaching photos of the upper rollers and lower bottom parts I need to replace. Looks Like I need 10-058. I may as well replace all of these parts. Can you take a look at these photos to confirm what I should be ordering? Thanks.

Hello! I'm looking for a better understanding of what pieces I need. The current glazing is old and chipping.

the tilt latch measures 7/16" deep 11/16" wide and 2-3/8" long the pivot measures 9/16" thick 2-1/16" long by 1-1/4" wide Please advise on part numbers I need. Also one picture shows that there are no sash stops at top to hide the necessary notch. What can I use to cover this. Thank You, Louis ... (cont.)

Hi I am looking for a pair of replacement pivot pins for a double hung sash. The dimensions are: 2-3/4" long, 1-7/16" to center of hole. (measurements taken from end to end). The shaft measurements are 3/16" x 1/4". The 2 part numbers that seem close are 26-030 and 26-226. Total over all length will ... (cont.)

I need to purchase approximately 25 of the sash lock in the attached photo. I understand that Philips is no longer in business, Can you assist? Randy

I am in need of the following parts. They are part of Jeld-wen vinyl single hung windows. qty- 4 plastic clips at bottom of balance. qty- 4 metal pivot pins qty- 4 plastic pivot pin receivers at bottom of sash Please see attached pics of parts and window label. Thanks- Mike

Hi this is a part from my windo holds the window up when open

Trying to determine to proper replacement part for a window channel balance. The part is white and is 34? long with a 33 REG stamped in it. The channel balance is screwed into the top of the vinyl window jam (so not slid in to the jam) and the string is attached to a balance knife lock shoe (white ... (cont.)

Hi there, I'm looking to replace the operator assembly for a right-hand casement window (opens to right when viewed from exterior), which appears to have become stripped. The windows and operators are both reclaimed and have no markings on them. As you can see, the arm comes through a hole in the w ... (cont.)

What is my replacement balance#1940 marked on it

33-c is stamped on bar. I need four . Can you help ?