Viewing all customer Discussions for:

Door & Window

Half inch width stamped ?1610? Thanks for your help.

This is 3/8 spiral non tilt balance - red tip 25? long.The shoe is a while plastic thing shown above, that slides up and down.It is broken and needs replacement. Also not sure how the shoe was put in place - because it is in the groove.The shoe is about 1 inch wide where it sits on the groove.The pl ... (cont.)

I see several that look similar to the pic. Not sure which one to choose. Champion does not show up in search

Looking for a couple of those little white plastic slides on top and bottom window track

My screen door lock and handle needs to be replaced looking to buy a similar one

Measures 2 inches longby 3/8 inch wide vent stop broken. I need 2. I did not remove the part because I was afraid I would completely break it without having a replacement

Hi there. No marking or words engraved on part. Do you guys carry this piece. It will save me tearing out a wall with backsplash tiles on it! Thanks

Shaft appears broken. Need to know which replacement mechanism to order. Here are the measurements. 5 1/4 x 1 1/82 5/16 link 10/24 threadWhite right handDo you have such an awning operator in stock?

I have four horizontal sliding windows with 2 panes each. I am wanting to replace the upper and lower sliding locks on each of the panes, eight lower and eight upper. There's no identifying nos. so I'm submitting photos in order to identify the parts I need. I noticed there's an "L" on the back of ... (cont.)

We need to replace 7 of the Awning operators. We think the awning operator is the same as your Nu-aire RH awning operator 39-278 (based on the patent numbers found on the old operator (see attachment photos). Question:1. Do you have the dimensions of the 39-278 so that I can compare?2. The end of th ... (cont.)

The markings on the part is 2130 the part is 23 inches similar to the 28 inch version the window is 32 x 20 for the whole window is Is 32 x 48

I am trying to repair the door latch on a single swing balcony door. The Roto part number I am looking for is 6303552420. I need up to 10 of this number.Thanks for your help-Dave

Good Morning, Alside Windows apparently does not honor their "Lifetime Warranty", claiming it is a "Limited Lifetime Warranty" Anyhow, I am trying to replace the damaged weatherstripping on all 10 of my windows. I see you have .270 (58-171) and .187 (58-182) bubble seal available. I just want to mak ... (cont.)

I'm not sure which lock I need for my existing patio pull handles. The pictures are attached. They're a little dark, but hopefully you can see them. Will any of you locks work without me purchasing new handles?

Hi, I have a white IWC sliding glass door with a broken lock. I can't find mortise hardware on your site that matches exactly. Please help. The entire unit measures 6 1/2" x 5/8". There is 3 5/8" between the screws. The smaller unpainted portion is 3 1/4" x 1/2". Thanks, Russ

Hello,I need to have 4 channel balances made for my windows.It looks like your SERIES 370 CHANNEL BALANCE is a match BUT the length of my balance is 26.5" metal end to end. An odd sizeYou're the experts so take a look. Let me know if you need more pictures from me. I've included a video as well.Plea ... (cont.)

Hi, I need to buy 2 more door rollers for a different sliding patio door. I don?t know the brand of the door, but I?ve attached photos of the roller unit removed from the door. Can you figure out what unit I need as a replacement? Thanks so much. Rob

I have 13 General Aluminum single hung tilt-windows Series 2700 that were originally installed when the house was built in 2000 and no longer open/close. I called MI customer care and they recommended that I replace the balances and gave me your website URL.Will the Series 600 spiral balance work on ... (cont.)

I purchased the Lever Lock Awning Operator 39-070. As you can see from my photos it is not the same size as my original.How do I go about getting the correct size?

I'm looking to get info for first time purchase of balances. I am a professional restorer but have not yet done spiral balances so any additional info you can pass along would be appreciated. I'll be ordering more for another job soon as those windows are nearly finished. This project involves two d ... (cont.)