Viewing all customer Discussions for:

Door & Window

having trouble with window shoe. it is stuch below the bottom of the window. I can not wiggle it in. I am having trouble attaching a picture

My best guess is Product Code: 26-393. Your help will be greatly appreciated!

I bought some balances from you a little while ago. unfortunately I didn't include the brackets that are needed. I need 12 of them.

Can not find the manufacturer of this window and one of them has lost all the hardware on the bottom pane that attaches it to the weighting system that holds the pane "up". Both metal slides that connect the pane to the sliding system cracked, broke and disappeared. On the left side, the blue inse ... (cont.)

Suitable replacements for these windows. Please! Non Tilt, wood, I believe to be Anderson, Narrow Line Series 200. The Visible Glass dimensions are; Lower Sash 28 7/16" Wide X 35 15/16" Height Uppe Sash 28 7/16" Wide X 23 15/16" Height The Markings on the old balance are clear, as yo ... (cont.)

I look through all the images on your site and couldn't come up with this Patio Door lock keeper can you please help me identify this item.Thank YouMark

I am looking for a part to replace this part. It is a LH and says MALTA

Please view the attached photo and let me know what you recommend. Larry

I need this trim, the left piece is at the bottom of one window, The piece on the right is a T piece that fits between some tri fold windows, it looks as if they have slide down and cracked down how do you get them back in---

There are no numbers or markings. I need 2 28" and 2 34". They are in channel for windows that tiltMike

I'm looking for the mechanism for a pizza crank, I need 3 left and 3 right can you help

Awning Operator. Possible 12" too rusty to crank all the way open. Side links measure roughly 5". Too rusty to see any brand or markings. I checked your sight for possible match. I see 39-143 but the handle is different. Not sure if that matters. Need your assistance.

Hi, I need 2 of these pivot lock shoes because the bottom portion that holds the round/white turning piece has cracked. Measurements are: 55 mm high x 31mm wide x 15mm deep. I don't see any that matches exactly. Thanks for any help you can give.

I am in need of 4 of these or parts to repair. I believe mine are the 34.5 length but they have black shoes on them. They're 15/16 wide. I didn't see that you had that specific one on your website and I didn't want to necessarily purchase the red one that you show in 15/16 since I couldn't find t ... (cont.)

Hi I need to change my window balances. I have different sizes on length but please confirm if S377 is the right one for me I don?t see any number on my balances however I weighted the window is that ok? Please find pictures attached. I need to order 34 units do you have any code I can use for disco ... (cont.)

I have a balance pivot sash. I saw one that was close but didn?t have T bar. See photo.

I need a left-hand hinge arm for a Pella window that was installed in the late 1990's. The outer dimensions of the window are 65 x 25, the actual window with glass that opens is 63x23PHOTO is a right-hand window right next to it. The rivet at hinge arm and bracket under window broke. So I need the h ... (cont.)

I'm hoping you can help. I cannot find a part# and need to replace both the right and left operators. All I know is the brand is Truth and the windows (Milgard) were originally installed about 15 years ago. I measured the length of the longest arm and it's 7 inches long.Thanks Cynthia ... (cont.)

inside locking latch twisted off took handles and screws off cannot get center mechanism out. door 1.5 thick. Tenant wants to put an outside lock on the door

Need a coil sash and the T-bar connector for a Simonton single hung window