Viewing all customer Discussions for:

Door & Window

I need pivot shoes and post. I've attached photos. Shoe size is 9/16 thick " tall 1 3/16" wise. Pivot bar is 3 1/8" long with a round head that is 3/8" wide

I recently contacted your company to identify a broken "shoe" as well as getting replacent balamce parts for a 20lb double hung window. I miscommunicated some of the information. The invoiced materials I received are most likely correct and i have attached a copy of that invoice. It is the shoe I ... (cont.)

Ordered and installed spring balancers on two windows, one window worked fine, second one dropped down, hadn't noticed top sash guides were broken. Hopefully you have direct replacement! The mounting hole is 1/4" from top of guide, Top to bottom guide length is 1-3/8" and width is 17/32", as close ... (cont.)

I need to replace the screen, locks, spline and two rollers for sliding screen doors. I do not know what to order.

The door is 29 1/2 inches long on the side that needs replacement but I plan to replace both sides. The other side is 30 1/4. I believe there are 3 or 4 grooves that the sweep would slide into. Any help??Maybe the bottom is a plastic piece but i am nervous removing it because rain already leaks unde ... (cont.)

looks like this number stamped on coil SP 32209 with capital P above number. other number stamped on coil is *4.0 35' P would like to order at least two replacements.

I hope you can help me locate the replacement part(s) for the attached diagram. The current installed sweep is in two separate pieces. I greatly appreciate your help. Thank you Dwight

I need (4) counter balances and the window frame plastic items for (2) windows. The counter balance is 1/2" x 29" length. Thanks, Jim k

Hello,I successfully installed the new channel balance, but I?m having trouble with the pivot bar. First of all, I can't get the cam lock in the channel balance to turn upright to where the pivot bar would be able to fit into it. I can rotate the center of the cam lock when I have a channel balance ... (cont.)

How do I remove this handle to replace a 83-115 latch? I don't see 2 screws to take out to get to the guts. Do i have to tear of the fake veneer to find the screws? I'm afraid if I do that it will look crappy... and I will need to replace that somehow.. Do I need to remove this wood vaneer to acce ... (cont.)

We are looking for these window parts (sash pivot):

Peachtree window pivit left and right this is a side mount w two screws. Upper part broken. My name is Jeff I looked through web site but could not find thanks

Hello Swisco, I checked the links to the replacement handles that you suggested and I don't see that they are what I need. I'm sending photos to see if possibly have any other models that may be the one! Thank you. Looking for replacement handle for Cole Sewell storm door, Estate Series, ES484776 ... (cont.)

Can you help me identify this window. The customer tells me they're made by Peachtree. It's a hidden balance system which is contained in the sash itself. I need to identify the balances for purchase. Also if you have a video on how to get them out I would appreciate it. Also I just need to know if ... (cont.)

I need the attached window operator handle and cover in whiter and both left and right latch catch. One of each of the three parts.

Greetings, Need replacement RH & LH spring loaded tilt-out latches - Mastic is the brand: OAL = 3 3/8" Width = 1 3/8" Mounting Holes Center to Center = 2 1/8" Would like 2 of each handed latch Thanks, Greg

Please help identify what replacement shoe I need for the one pictured. Spiral balance tilting window 29" length red top

Wondering if these are installed correctly or need replaced? Our door will not lock at this point. It feels locked but if you pull really hard it will open.

I have attached photos window balancer of my condo window built in the year 1994. I also need to cost.

Hi, I need to replace my slider handle. It is a 7" handle.