Viewing all customer Discussions for:

Door & Window

Good afternoon, I have no idea what the brand of my windows are.one of them(sliding vertically) is broken after 15 years, and I need to replace the channel Balance. The only info on the metal part of it Reads: 26 4 GW CMC 10. The numbers are spaced just as I have written. The metal part ... (cont.)

These are the parts that the the spiral devices that keep windows up are hooked into, and where the bottom sash tilts. No window name or part number found. I am looking for replacement parts

We have D209.812 D213.676 Nuprime All-Season Windows throughout our house. Over the years from removing the windows for washing the Plastic Clips that holds the springs in place when the window is removed has broken out on a couple of the windows making them hard to remove and keep the spring in pl ... (cont.)

Looking to replace these old casement windows parts, will you be able to help?

SASH CONTROL INC. 3 15/16" HOLE. MARKING ON THE INSIDE OF THE HANDLE 060-1255

Hello, We have a log home which was built in Canada and assembled in Big Bear City, California. The only identification on windows is Westeck, IGMA-2004. We had been in contact with Westeck many times over the years, as parts were breaking. They had sent us all their stock for parts and told us ... (cont.)

Hi, I have awning windows that are stamped/branded Pan Am, I uploaded a few pictures of the cranks that they used could you look at the picks and advise what type of replacements you have that could be used?

Roller says ?Kilian?. I have 3 doors that have them. Pics enclosed.

do you have the bolts for this? or a repacement ? #6 are too small #8 are too big doors were purchased at Home Depot in 2007

I am looking to replace 3 casement window cranks. They all open from left side.

"LINCOLN" stamped handle for a casement window I am trying to find 4 of these handles. Not concerned if they say Lincoln, but color matching is very important!!

I recently purchased beading 55-180-6 tried a test piece hard to install possibly the wrong size. Can you help me with this installation? Rich

I need a pair of top sash cam guides # 18-562.

Hello! I have a storm door with an added panel on it that makes it 1.5 inch thick. So no standard LYNCH on knobs work on it. I saw your name on the handle that broke so I hope you can help me! I?ve looked everywhere to replace this handle! Thank you!

Please identify

21 inches long stamped 28 onside 1/2 inch wide also has very light markings of 2090 bis MF

I can't seem to find anything printed on these parts. I took the lock off and looked on the back side. I looked all over all sections of the door and there's no manufacturer name even printed on the door. The customer would like to just order a new keeper but if we have to get a whole lock assembly ... (cont.)

Hi, can you tell me if this is plastic or metal? Thanks!

Stamped code is "21 12" - it is a double pane thermal window - we have weighed the sash and it comes in at 38# - the metal channel is 22" long. I have to verify with my son the depth of the shoe but can I assume I need either a S351 or a S390 (depending on the measurement he comes back with) - item ... (cont.)

Good afternoon, I have an 18" window channel balance and the string has broken. I am looking for a replacement but the stamp is a 16-4. I cannot find anything other than a 17-4, is that interchangeable or do I need to locate the 16-4 specifically? Thank you in advance. -Marc