Viewing all customer Discussions for:

Door & Window

Thank you for your help with the lock cams they work Great ! How ever I have noticed that the locking pins that are riveted to the window are falling off also. Can you help in identifying these pins do you have them as well? do you have them in a self tappimg or do i have to take the window tr ... (cont.)

Need replacement balances for Jordan Window series 8500 for right and left sides. Markings on balance: 34B RD BSI

I am looking for a handle with key lock for a Left hand in swinging storm door. It is to a porch enclosure on a 1988 modular home. I believe it is a dura-bilt enclosure my understanding is these enclosures are modular built also, meaning they can put the doors any where on the enclosure, and swing i ... (cont.)

I have a Larson Storm Door that the lock broke. We discarded the handle already but the number on the door is Reg# 34504082.112030506 attached are the photos of it. I just need a simple lock and handle, nothing fancy. What do you think will match it?

I need to find one (1) Andersen casement operator with fold down crank handle in bronze. The housing is stamped C-1081-111. The first arm is stamped S-1081-36 R and measures 4-1/8", the second arm is stamped S-1081-66 and measures 4-1/2". The hole spacings are 3-1/16" and 2-1/2"

Need hello identifying part

Best guess: 1980's or 90's. The storm window covers a very large picture window, and is overall in better shape than it appears in the photos. We need to replace a few of the brackets. Do you have these? Thank you.

Looking at the pictures, the part of the trim that goes inside the door frame is 1/4 inch and the outside piece of trim is 1/2 inch.

Hi I Need the correct tie bar I need the proper number of tie bar clips I need the proper locking handle I need the proper multi point support plate. I also need new interior weather stripping Thanks

Having trouble finding the replacement sash guides that are the same dimensions as the originals. Those listed are to long on top.

Prior to purchasing three of your skylight operators(39-379) with eyelet adapters 39-247. I need to know what type of an opening if any, there is in the metal hook (39-214). I have a 3/8 solid rod cranking pole I can adapt to most anything. Just easier knowing whats available.

I have a bottom sash with both tabs broken off that would normally engage the balance assembly. I believe the balance assembly is still good but I can't seem to get the small broken pieces of the cast aluminum post out of the balance assembly. There seems to be small retaining tabs cast into the br ... (cont.)

1999 Simonton windows 35.5 x 59.5" Two balance coils each side. Both coils snapped on one side of sash. Coil supports mounted at top and pivot shoes at bottom of sash appear to match your 15-111. My coils match the ends of your S160-5, but my coils are longer than 35". Marked #5.5, 39" 061198. I ... (cont.)

I took this lock off my sliding glass door and cannot figure out how to put it back in. Please send illustrations.

My window has broken at the bottom part that connects to the window frame. The pics should show what happened. Basically, I was leaning out the window to trim a tree and should have removed the window but did not. What happened was I bumped it when it was hanging down and it fell out, breaking of ... (cont.)

Hi, I just order 7 of your balance springs and they work great. However, 1 of my windows has a broken sash guide/clip. Do you have this? I have other pictures and measurements, but could only upload 5 pictures

The plunger pins have fallen apart on many of my screen frames.

I live in a Oak Creek manufactured home. I have a Kinro 45 x 50 vinyl tilt window that have parts at the bottom of the sliding panel that will have broken off and can not insert into the balancers. I am looking for those parts. Can you help

I am looking for window glazing beads for an aluminum window. The window is 29 years old and I do not know the manufacturer. I have attached some photos. Thank you.

I need 8 of these, please