Viewing all customer Discussions for:

Door & Window

I am looking for a handle for my front door the registration number is 06129694516 173. Cole Sewell. Storm door full glass.

Hello. The balancer is from a non-tilt Milgard. Metal is 24" long x 1/2". Numbers stamped near the bottom say, "2390FG25." Is that a series 390? Pictures attached. Thanks, Richard

It's for a vinyl double hung window. Height of window is 33" & the height of lower sash is 17 1/2" Please let me know if you need any other information. Thank you!

Need a replacement keeper/strike for my sliding glass patio door. Not sure if any of your listed parts will work for me. Pictures are attached. Thanks is advance...... Bruce

Door lock is missing. 8" handle with lever locking handle [also missing]. The male lacking mechanism opening is ~11 1/2" long. The female mechanism is in photo and appears to be a double lock. This piece is 10 3/4" long. We need whatever will fit and is required so we can install it ourselve ... (cont.)

40-155 dead bolt sizing .looks like from the inside of the storm door it must stick out a little more then 7/8 not much.the door is the right thickness .

I believe what I currently have can be replaced by your part 39-031 (locks on the upper left of the window). Part numbers that I see are 20810, 3084?L and 30744. Everything works well, the gears turn; but the "spindle" looking part that the crank attaches too disengages from the bottom portion whe ... (cont.)

Need a sill cover cap will the product 80-102 work for my door.

Like to match this up

There are not any names on the window or the parts. Kenneth

hi, I found your site while looking for hardware to replace Andersen window casings 7030A (2) and B. The 'genuine' Anderson parts are $150+ each. Way too much... I saw a thread where someone recommended the 39-094. Later someone posted that they installed this, but they had to do a lot of work shavi ... (cont.)

After a lot of jerking around, I finally got these two channels away from the window. I'm not sure how they'll go back in, but I trust you can help with some good instructions. Your video clip looks neat but I don't have that little latch on the inside of the frame used to help get the channel out ... (cont.)

how do i find the balance weight for my window i don't see it stamped on the balance

Hello Do you carry a replacement casement crank of this style "Wright" Window is about20 yrs old works fine just have a broken crank to replace if possible

This picture measures 1&11/16 top to bottom of wheel & also measuring across the part that inserts in door slot, 2&7/16 from tab to tab(one is broken off), roller is 1" diameter, holes to attach to screen measure 2&1/8 between. I have not been able to determine what brand it is, although I believe ... (cont.)

I received my 87-188 rollers today, and it looks like I guessed wrong on the fit from the pictures. These plastic frames are smaller than the frames from my Better-Bilt dual-pane sliding windows. My fault, but do you have another model that is larger and might fit? I've enclosed a picture of ... (cont.)

I need help finding the correct top sash guide for my windows. Please attached photos. These will be used in conjunction with a 22

We have 1986 carclad casement windows. I am sending photos of the broken crank. I also have a view of the cross section with the dimensions that may be helpful. They are from the original book when we purchased our windows for our home. These cranks have failed over the years and most all need to ... (cont.)

See attachment looking for matching pivot and 30" spiral balance red 5/8

I am in need of the plastic clip that slides in window track that connects the window ballist with this clip. I have attached a photo of this clip. I will also need the ballist, at the end of the ballist the color is red. Can you help with these parts