Viewing all customer Discussions for:

Door & Window

I have 2 different balances; shoes and tops seem to be exact. I think the shoe I need is 15-004.One is 29 4 BSIOther is 29 9 BSII am needing:ShoeCordWheel & housing for cord (please see picture)RivetThank you in advance,Maritza

Want to replace all windows, Double Pane 1991 Built. Also have to check on 2 other windows I believe to be 2840 My Measurements were 7 windows 33 and 2 43. Would need all clips to make all windows like new. What do I need.

I was just wondering if this is the same as the mortise internal patio lock you offer for $37? The bottom lock snapped off of mine.

We have Alinco single hung double-pane windows that were installed in the

Hi, I am in need of 7 window cranks for our windows. The only information I can find is: HG04 2004U. I appreciate any help you can give! Thanks, Allison

The handle broke on one of my Anderson window sash locks and I'm looking for a replacement. The attached photo is of the other window with the non-broken sash lock. Thanks!

I am trying to find some replacement spiral balances. I believe the (non-tilting) windows were originally imported from China, and almost all the balances are now broken or ineffective. It

Help. I have 7 windows in my house that the balance block and tackles have broken. I need to replace them, but I am not sure the proper replacement part. The only stamp is 3940 on the bottom rail. The parts are 40" metal to metal, and 5/8" wide. I have attached pictures of the ends. Thanks. Lee ... (cont.)

I'm looking for a.Patio door handle that will fit. It's an old patio door (over 19 years old) the 315/16 is too big.

Greetings - is this product usable interchangeably for both left and right hand opening casement windows?

Our K&K windows are about 25 years old. We have a small bathroom window with a stripped handle. The handle is shorter than the on on our regular windows. We could go with a longer handle but prefer a small one. Do you stock anything that will fit? I also have a few cracked covers. I found handle c ... (cont.)

Need help identifying this part/ door model. need the stop

Here are four pictures of an existing 2740 channel balancer that I need to replace. What part/model do I need to order? John

Hello I need 4 balance replacements all same type/size. Dimension: width 9/16" (it is a little bigger then 1/2 in), length of the metal part 28". See also 114/115/116/117 pictures attached. Apart from that for one window, i need the top small plastic part (not sure how that is called, see img_0 ... (cont.)

I did receive an email some time ago about identifying a Owens-Corning Window slide with a request for pics of the internal tilt window latch; but my email has been down on my home computer. If you could Identify the part number so I could order a few; that would be fantastic. Thank you, mike ... (cont.)

I need to order one of these but am struggling. The length of the metal is 24 inches. Here are picks of top and bottom. What part numbers are these?

Hi, I think we have Martin windows. We closed on our newly built home in January 1993, so wimdows were installed in late 1992. They are double hung tilt in windows.. We are selling our home and have to replace a broken counter balance plastic piece that holds the spring system and window in place. ... (cont.)

22 4 JO CALDWELL Thats the only markings on the window slide/lift assist. I've been searching online, but its been entirely unsuccessful, sites end up directing me towards all sorts of irrelevant parts and pieces. If you can help find a model number for me or maybe even help me place an ord ... (cont.)

Could you please advise what 27" channel balance I need for a non-tilt window, manufactured by Viking around 1997? The part is stamped 2630. Attached are pictures. Should I order S395-27?