Viewing all customer Discussions for:

Door & Window

Worker on a job replacing 35" balancers for a client. They're TRACO windows with a double balancer set up, (1) larger dia, and (1) smaller dia balancer. Have matched the shoes to the 15-118, and customer has previously purchased the larger balancers, but was unaware of the smaller dia balancer tucke ... (cont.)

My window currently have a red tip, if I change it to blue, would it be lighter for me to slide up or down? Best,

Have a Pella slidind door needs roler.Installed in the 80',Which Rollers do I need.

I need one for both sides, and assume they are different, or are the new replacement ones retro fit to fit both sides equally. Is there a difference?

I bought the 40-123 Key Cylinder with Thmbturn, Kwickset, but that cylinder would fit a door that is 2-1/2" thick. I need a cylinder for a Pella storm door that is about 1-1/4" thick. It is okay if the cylinder protrudes about 1/4". I am about 240 miles from the house where I'll do the repa ... (cont.)

Inside parts for window sash

H, I ordered a pair of 26" SERIES 385 CHANNEL BALANCE. I still need 'top sash guide'. Which guide should I use? I am attaching the old guide I have on my window. Thanks

Hello I have windows with Unique balances 38 TG see pics as well as Release hardware see pics. What do you suggest?

Hi, I need to replace this bronze Truth window operator. It looks to be 21.5" wide and the arms have a part number of 30895A. I also need a handle for this operator and two additional handles. Thanks, Stephen

Hi this is crystal windows about 20 years old. The width is 1.5in The length 2inches Thanks

I am attempting to find the missing lock handles that I have posted photos of. There are letters that say A W on the cover (see photo).

This roller is original to the sliding glass door from our home built in 1976. When the roller is laid down flat on it's side (as shown in photo #003) the length is approx. 2 3/4 inches and the height is approx. 3/4"

Can you find

I am need of this part for 2 of my windows. I cannot get it apart to see the sliding part so I need the whole assembly? Please let me know if you have these. I would like to buy 5 of them.

looking for some mitered corners 7/17 is width of screen the black one is one I found that works even though it is only 5/16" thick from Hurd windows alum clad csmt 2008 I used to well windows and millwork so am pretty familiar with this stuff

Good morning. I'm looking to purchase 12 pieces of this glazing bead @ 12'. Can you please confirm if you stock it? Color is white. Thank you

I am looking for replacement weep covers for a Harvey Bow Window installed in the early 1990s. I am unable able to locate the model # label anywhere on the window. The weep hole slot is 1 5/16 x 3/16. The overall cover size is 1 3/4 x 5/8. The weep cover snaps in place by two tabs that go through ... (cont.)

I just received replacement sash springs (series 795-30C) and they are not the same as the ones I need to replace. I've attached a picture of the ones I currently have (right) and the one I received (left). I looked around your website and couldnt find what I was looking for. These are Patriot windo ... (cont.)

The STOP is broken. How do I remove and replace?

Hello, Could you identify the glazing from this picture? I am replacing glass and glazing in my builders grade vinyl windows built in 2000. Thank you. Matt H