Viewing all customer Discussions for:

Door & Window

Hi, I have a crank window # 40754 and the white handle # 40085. don't know the brand. do you carry those parts. thank you

Patio Glass Door Handle Set, 3-1/2", Product Code: 82-262. I need written instruction on how to install this

I am looking for 2 Channel Balances for a Nuair Window made in 1992. The aluminum channel is 17" long has the marking C 1610 on it. Photo is attached. Do you sell this part and what is the price? Thank you, George

Hi, I need help finding a part similar to or one that will work the picture, there are 1/2 inch between the screws, no name or markings. Please help Thanks Jens

I am looking to replace the latch plate with built in weatherstrip on a Kawneer door but the 79-029 and 79-030 won't work I need something that has two openings in it one is 1" and the other is 1/4"

Each screen has 2 latches at the top to hold screen in place in the frame. They appear to be riveted and definitely not screwed in.

Window slammed down found the left hinge broke.

Please find pics of the channel balance and advise me which one to select. My old balance has 3405 RA BSI on it. I need 2 total sets including everything and assembled as well as I am not that handy. Thank you in advance.My name is Mini

My window balance is broken and I would like to replace it. But, i can't find stamp number. Instead, I found the code of "25 4 IQ".on the metal frame. I am not sure if the model of S385-26 is correct. The top and shoe come with wing. I thought it may be 15-004 and 19-005. I attach the files, a ... (cont.)

Greetings: Some of my window spirals are totally worn out. It measured the aluminum tube and it appears to be 23 inches & 5/8 diameter. My questions is can I use the Blue Tip in place of the Red Tip? The worn out ones are Red Tips, but they don't seem heavy duty enough for the window. Would t ... (cont.)

Please see attached pictures. There are three sizes of single pane windows with balances marked 2340, 2820, and 3440. Please identify which of your part numbers these are. I think they are series 351 but i'm not sure. Thanks, Sandor

Hello, I need some help recognizing the part I need for my bedroom windows. The windows are Simonton, double coil. Not sure what else I need. I attached 3 pictures of the labels and the actual part. It seems like the internal parts are fine, I just need the "cover" part. Looks like 4" long and 1" wi ... (cont.)

Is the 39-430 the replacement part for an OP051506? Pic attached

The length of the metal channel is 20 5/8", the width of the channel is 9/16", the depth of the channel is 5/8" I also need two replacement 1/4" metal release clips

The ones I ordered we're wrong unfortunately. The upper parts were right but this is the ones on the lower side. Thanks -john

I looking for the cup like parts which fit into the screen jamb and receives the screen plunger. Many of these cup like part are disinegrated over the years ...See Pic

Hi, I need 3 new channel balances for my bedroom windows. The stamp on my channel balances read: 33HP 44-45 F25-A CMC 6. The metal part is 34 inches long. The tops of two of my channel balances which are very similar to your item # 19-005, are broken. The cord of the third one has come off the pul ... (cont.)

I am trying to find the right tilt latch. According to the distributor, they think its an 8000 series from Survivor windows. The latch is approx 2 3/8 or 2 5/16 inches long, 1.5 inches wide. Any help would be greatly appreciated.

Hello, please refer to attached sketch. I was checking your website but cannot verify. Do you have a window screen corner that will replace this?

Can you please take a look at the attached . I need to order three of these and want to make sure it is the correct replacement model number. Looked at your website but want to make sure. Window were installed in early to mid 1970's. Measure are close approx. Thanks, Steve