Viewing all customer Discussions for:

Door & Window

I saw something similar (82-240) to the photo below but it did not have the 4 tabs at the bottom as shown. DO you have a part as shown below.

Hi. I

For Screen Door Roller, 1" Steel BB Concave Product Code: 84-074 How does this part attach to the frame?? Do the two holes on the top ends accept screws or bolts and if so do them come included? How high is the part of the 84-074 which must fit into the frame for this to work (ie how de ... (cont.)

Dear Sir or madame, I have attached the broken parts from our window as well as a picture of the window and the base of the crank that remains attached. The number on the inside of the crank is 2108. We don't know what part to order. Could you please help? Thank you. Best, Missy

Hello, Can you tell me what I need to order to replace a window crank? I am attaching a photo of the current crank which does not operate. Thanks,

Hi, What model of screen spline works with 56-090 wicket? I have .14 spline. Will it work with 56-090. Thanks

Hi, I was emailing with Jody Reese this afternoon about my vinyl window lift handles are all breaking off of my apartment windows. The window are functioning perfect but the lift handle are starting to break off of all the window. It is becoming a little difficult to open some of the windows th ... (cont.)

I have a project where I need to remove about 6 dozen sheet metal screws and replace them with similar screws only 1/4" longer. The screws I have now are #8 x 1/2" coarse screws painted white ( .163 major diameter, .122" minor diameter, and 15 threads per inch ). I am wondering if the 33-090 fits ... (cont.)

I have internal tilt latches on my vinyl windows. Do you have this? And how do I get it out? The one on the right still has the spring in it. The one on the left doesn't.

Is the Peachtree 81-112 available in stainless steel? We have purchased ss in the past. Property is located on the ocean so corrosion is a big issue. Thanks, Chris

I just bought two Andersen operator covers but they won't snap into place. Do you have other sizes? See pictures.

I have three windows in need of replacement parts. Two are the same size window and the first one pictured below is a smaller bathroom window. Please advise if these photos adequately show what is needed and if you carry the supply parts that I can use to repair. Thank you very much. Athena ... (cont.)

Dear Swisco, I am looking to replace 54" high orange spiral window balances. Is this something you have in stock? If not what would be a rough estimate per piece to have them made? I have 8 double hung windows all in need of replacement. I will also need some other parts as well but wanted to check ... (cont.)

I need new channel balance for my windows, but I can figure out what the other pieces are. I need to get these parts so I can fix my window asap! Thanks for the help!

Hi I have a casement window which was part truth 40055 right side. The one fits but the white plastic roller that goes under the window piece is too thick and I cannot fit it into it. (The piece that you mention in picture that is 9/16") The old style is a single metal platen and without any r ... (cont.)

Will these clips also help with the expansion & shrinking of the metal frame due to heating and cooling in day/night? My windows cracked after a few days when I last replaced them.

Looking for subject part measuring 1/4" X 1/4" X 1 3/8" replacement key for bottom to side of triple track window frame. It is made of metal.the corner key is fastened by small screw to bottom and sides of frame

Unidentified window maker. Guess is 2000 or earlier. Without removal, basic dims are 2.10 height, 1.30 width. Can't tell color of brake.

I've got some 15 year old Alenco Windows that need to have the exterior glazing trim replaced. The exposed area is 3/4 inch wide after install. Thanks!

What type of balance do I need for these windows? My track shows a stamp of 26HD. And do I need any other parts?