Viewing all customer Discussions for:

Door & Window

Do you sell the plastic pulley part in the 2750 balancer which the spring attaches to? When my balancers break, it is usually the tab on the end of this plastic part that the spring rips away.Unfortunately, this part is not strong enough which has caused many of my balancers to fail. Do they make a ... (cont.)

Are you able to identify an Andersen balance from the measurements of this window? 31 3/4" x 45 1/2"

Hello Trying to find the attached window glaze. Each side is 1/2 inch. Thanks

fits in a simonton window 9041220/05 37.0000 63.0000b6sh 20006 7/16/04 part number 5446997,6076314 looks similar to part number 55062-6 will it work

Hello, I am in need of 40 of these items. I just wanted to know if they could somehow come with the actual wheel also. Or do you supply them separately?

I was able to use your 40-150 inside door handle to fix an Emco Forever door I got from Home Depot about 10 years ago. I had to remove the key stock and reuse it which meant removing the shaft size adaptor in your handle. The original Emco door never set the handle back to its center due to a heavy ... (cont.)

I have one 3 foot strip at the top on my window that has shrunk and buckled from the heat of the sun. The other sides look fine. Can the 6 foot piece you sell be cut to size? Do I use a hacksaw or do I need a special cutting unit? Do I need to replace all 4 sides, or just the one that is loose? ... (cont.)

Bracket for window

I have a window balance that is broken and needs replacing. It is a true 1/2 inch channel width, and appears to have a 15-003 shoe and a 19-005 top. It is 28 inches long, and stamped with 2730. I did not see any channel balances listed with this top/shoe combo. Can you help in identifying the rig ... (cont.)

Can you locate a tilt cam like this one. Please help!

Hello I am looking for this snap in beading or something similar that can hide and cover. Can you guys help me out. Thank You

I accidentally threw away our hardware to our windows!! Please tell me you have these based on pics and it says they are Caradco-916

Hello my name is Dale Ferguson. I am a maintenance supervisor at CHP in Blacksburg VA. I have several windows with these constant tension balances but am unable to locate replacement parts. I have found that when I raise the window the tilt locks installed hit these balances and one or the other bre ... (cont.)

I am looking for glazing bead to replace a few sections on a client's home. I am finding *almost* the right thing but none of the vertical face pieces are never quite long enough. I am attaching a photo with the measurements of the existing glazing bead. Thanks for any help you can give! ... (cont.)

There are 4 to the window and snap into a rectangular slot nest to the tracks. Two on each side at top and bottom

I have season all aluminum double hung pull out windows , I need parts for the sash locks and other parts , do you stock them ?

I have an old Larson door with the original keyed lever deadbolt lock and latch(Larson part 305005, which is discontinued). I simply need to replace the inside latch. I don't so much care that the lock and key from the outside work. The inside latch made a crack or some sort of odd sound and would ... (cont.)

What channel balance can replace this?

I am needing a new lock for my sliding patio door. Please look at my pictures and let me know which lock I need. I think it is the replacement lock #82-211, but I am not sure. Please advise.

Hello, the stamp on my balance reads: 12KL B.S.I. pj The balance seems to measure 9/16" wide and 1/2" deep. I tried to replace it with a 12B JE. But the replacement is attaches differently and interferes with the operation of the window. AND, it doesn't hold the window up. I've been to a lot of ... (cont.)