Viewing all customer Discussions for:

Door & Window

Existing KK Window Operator, casing ~5 1/8", looking for lowest profile folding handle replacement. Help, please. Thanks!

Based on the attached photos can I swap out the existing lockset with the 40-089 Key Tumbler Thumb turn?ThanksC

Broken window lock. It's the part to the top fixed window and has a number 2 on it. Flush inside mount

Hello, I have attached a photo of the balance shoes currently used in our MW vinyl windows. The patent number on the product is 6.679.000. As MW is no longer in business, I am unable to get replacement shoes from them. I found a very similar product in your online catalog, PN 15-195, which might ... (cont.)

Attached are photos of my bifold closet door. The bottom disk cracked. Do you know which would be the replacement? Also, how do I get the disk in the track when I get it? Do I have to pull up the track to get the disk in?

Windows sizes are 58"x36" and 36"x24"

Diameter is 3/8", length of the tube is 25". I believe I need the 400 series but there is no tip color option? Current tip is green. The second photo shows what the spiral attaches to at the base of the sash. Do I need to purchase anything other than just the spiral balance?

Thank you for having such a great web site. Trying to match the crank assy that I sent pictures, the 39-025 is very close but the bottom screw holes are offset a little and the connector arm is a hole and your looks like a pin. Please let me know if this is the closest or if you have a better ... (cont.)

HI: We have Kinro windows in amodualr home. The Proper Spiral Balance Tip Color--we cn't tell--but the window weigh 24 lbs. Weare guessing it might be red--but does it hurt to move up to heavier duty one--i.e., green? The tube measure 29" and is 3/8 or 5/16 depending on which diameter of the ... (cont.)

we are looking for this part for our kitchen drawers or a substitute which would work. We are wanting to replace all hardware on our kitchen cabinet drawers

Part is for an Anderson window 20x30 with a crank handel in the center. It opens out from the bottom. If available, can I order them online?

Hello. I have identified balance as 18" Series 400 Spiral Balance Product Code: S400-18 need to know what bracket and sash guide to use. Please Advise. I have attached pics Thank YOU!!! Carolyn

Just need to know the part number for this counter balance for left and right side.

Pivot Bar, 3" Product Code: 26-040 looks similar to mine. What do you think?

I have new vinyl double-hung windows. Is it possible to add a sash lift to the bottom of the the vinyl. If so, how would I drill it? Thank you!

Trying to submit but no luck, attached is the parts I'm looking for. Hole spacing is 3 15/16 says Canadian patent on it, mortise lock is W&F MFG. GLENDALE CA Does not need to be keyed.

I have a storm door that I have never had the key to and I want to re-key it (or replace it if I have to). Underneath it, the pin holes do not have set screws, instead, it appears to have flat surface as though it's filled. Please see attachment for a visual. Can this lock be rekeyed? If not, wh ... (cont.)

What parts do I need to put this tilt window back in operation? My coil balance has a 740 stamped on it.

Hello. I am hoping to replace both sliding glass door roller assemblies for my International sliding glass door. I have attached images. The body appears to be about 2-1/4-inches long. The body appears to be about 1/2-inch wide, but taking into account both dimples on opposite sides, the body appear ... (cont.)

I need the replacement latch/lever that fits a Philips window that slides 'closed' by sliding to the right. About 1995 manufacturer. Also need steel rollers for that same window. Thank You, Doug S