Viewing all customer Discussions for:

Door & Window

ID on handle - c-7442-5. IDs on plate - 7442-3 and 7442 - 4

This is a pic of my window. I need the roto casement track to go underneath and handles for the cranks. They are stripped. Thanks

Hello, I am looking for replacement operators for about ten 1979 Pozzi casement windows. I would like the left and right operators for each. I spoke with a salesman about this and he suggested either a 39-027E or 39-013 operator. The existing arm is about 11 inches long, but the 39-027E is 9 ... (cont.)

I have a guardian sliding door and the lock is completely missing. The hole where the lock sits into measures 3 Inches, and is 1/2 inch wide what lock will you recomend? Ralph

Trying to find replacement glazing bead. Vinyl window - no markings. Brittle and broke when trying to remove to replace IGU. Any suggestions based on the picture? Thanks Karen

Is the entire tilt latch made out of steel? Meaning is there no plastic or vinyl on the latch

I need to replace a channel balance for a non-tilt window. I think I need either a series 350 or series 385, but I don't know the difference between 19-002 top piece and 19-005 top piece. The balance I need need to replace is marked 26 4 JR -- it is 1/2" wide and 27" long A couple ... (cont.)

I have a Sears brand storm door that needs a replacement latch. The outside is a knob, but I'm not wedded to the replacement being the same. The holes are spaced 1 3/4" apart, but the door is 1 5/8" thick. I could not find a kit in my local hardware store for such a thick door. I thought about tryin ... (cont.)

I have vinyl windows that open up and down with the exception of one the open top and bottom. I am trying to identify which wedge I should order. I am trying to prevent someone from entering our home by prying it open or if a window is left opened. What are my options?

Hello

What is the replacement part number for an Anderson wood double-hung (approximately 24 x 48) window. The house was built in the early 60's. What appears to be a date code on this balance shown in the picture is 6-31-1952. Size is 2 7/8 wide, 6 5/16 long and 3/4 inches high

The numbers on the main body just above the Andersen name and logo are 11600-17. There are numbers on the tab where the staple attaches the balance to the window. on left side of tab it has 927. On the right side of the tab it has R42 4 90 On the other side of the balance there are numbers just ... (cont.)

all i have is window size single pane glass single hung windows what size do i need.

Hi Swisco rep: I enjoyed the U-Tube training video on replacing storm window parts. I have a house that has LE-AL-CO storm windows and need to find some replacement parts (tilts and bottom spring latches). Your 95-191 tilts look like they may work but I do not see anything that will replace the ... (cont.)

I believe the part I need is called a Top Sash Guide. This part screws into the top of the window housing and holds in the channel balance. The Channel balance is 1/2 inch wide and is 28 inches long. Any help or suggestions would be greatly appreciated. Thanks, Brian

Can you please identify this part and let me know if you have in stock? How long to ship a replacement to Hickory NC? What is the price or is it easier to replace the entire piece? Thanks Anita

Your 84-028 Peachtree Patio Roller, is the spring loaded one, with that screw on the back for height adjustment? Thank you for your help. Peter

I need to repair a sash window with balance, exactly the same as I

Overall length 9-5/8 Overall depth/width 2-3/8 Center to center outside holes on plate (not box) 8-11/16 1-3/4" backset size I took many other measurements should you need them

Please refer to attached that I explain the window channel balance with picture and measurement. Please advice me how to make order and which is order number of window channel balance in website