Viewing all customer Discussions for:

Door & Window

Window Glass dimension is 24" H x 32 3/8 W, Double-Pane Andersen Corp (Bottom Side 11600-17, Top Side 11600-3) Stamp E45 9?27 7-86 (? could be a 7 or / or 4)

Do you have these and what brand are they? Any info would be a big help. If you carry them I need a price for @ 18 cranks and 4 covers.

I am trying to identify this spring. It has 26 9 AW CMC 2 on it.

Trying to find replacements part TRUTH 40049A 40224 40064 PAT. 4505601

Hi, I have about a dozen windows that need the balances replaced. I have included pictures of my current balances. The window measurements is 35" x 58.5". I did measure the metal rail of the balance and it was 35" x 1/2". I narrowed it down to series 380 or 385...I think. Can you help determin ... (cont.)

I need to replace the Cover that goes over the working parts of this crank. I measured and the piece is about 1" high and 5" wide., Needed in the color shown in the photo

I live in Florida, house buld 1985,I looking for window snap-in glazing don't know window model or how buld it.

This is 32 inches long the end piece broke that screws to the window. Do you have these or know how I might be able to locate the piece that I need ?

I have Simonton Windows in my home, which are approximately 14 years old. Each window has two plastic pieces that house the balance in the side of the window. The pieces are 4 inches long. They're all broken, so the windows won't open and close. Can you help identify this part and tell me where I ca ... (cont.)

There are no markings on the part or window. Could you idenify the part with just photos. Thanks

I have a 31.5lb window, well I really have 4, all needing new series 385 balances. The 2850 tops out at 32, so I would be maxing it out. I will go with the 2860 for its 32 to 35lb range. My question is will the window raise any easier with the few extra pounds of lift? Also, just out of curiosity ... (cont.)

Hey, GREAT SITE. I need a new Channel Balance for my window. I believe I need 26" Series 380 Channel Balance Product Code: S380-26 I am unsure on the weight? Attached are picture that I hope help. Thank you

The sash is a channel sash with a pulley at one end. This is not a tilt window. The Channel width is

Hi, I'm looking for a replacement spring balance for my window. The length of my old spring balance is 32 inches. Feel free to contact me if you need any additional information or pictures. Thanks.

Looking to replace several pivot shoes that have deteriorated and broken apart (see attached photos of an intact pivot shoe). I have already identified the associated Pivot Bar part number and installed them as replacements (they work great, except, of course, in the windows with failed pivot sho ... (cont.)

I am trying to identify which channel balance I need to order for my windows. I have included 4 pictures of which now pic contains the stamping on the channel balance. I hope you can help me to identify the parts I will need.

I generated another post to identify the pivot shoe. This post is seeking assistance in identifying the channel balance. As you will see in attached photos, the balance housing is 31 inches long and about 1/4 inch wide. Thank you for your help.

I need external tilt window latches(both right and left) fro Traco Tilt Windows They measure 3/4" X 2 2 11/16. Color is white underneather the R is the number 8 and on the spring tab o the bottom is the number 60 or 09.

Hi Jody in customer service said to send this info. I purchased item # S351-19 Option 1830 and it is not strong enough to hold window. The window weighs 18 lbs. What special order balance do I need? Thanks.

I've done my research. Both the "how to replace" as well as finding the correct part. I would like some help cross referencing Andersen's part number to your Swisco part number. What I have is: (Trust me that the Andersen # is correct re: visible glass specs.) Andersen # 3452 (I'll nee ... (cont.)