Viewing all customer Discussions for:

Door & Window

Please see attached pictures. I think I identified the correct Coil Balance Shoe (# 15-175), and I was curious if you sell the cam separate? I need 6 of them. There is an "18" stamped inside the cam. Thank you, Alex

need 4 of these adjustment screws

I have two patio door rollers that I need help in finding. Thanks

Weight of the window sash: ~ 22 lb Height of the window sash ~ 89cm My window uses Dual Coil balance parts as shown in the picture. Each sash uses 2 parts (one on the right side and one on the left) coil diameter (when mounted) ~ 28 mm Spring thickness: ~ 0.21 mm Spring ban

Could you please tell me what size pivot shoe I need and what size tilt latch I need to replace my broken parts. Also I find a label that was on the window don't know if that helps. Thank you for your assistance

From Eric 26-157 tilt window latch.

I am looking for a guidespring that goes into a pivot lock shoe This is for a 3 rivers dbl hung tilt out window

Attached is a photo of existing sash locks that I would like to see if you carry. The locks are from MW Windows (the original windows on my home), but MW Windows is no longer in business. In addition to the sash locks, I am looking for the metal shims that go with each piece of the lock (the l ... (cont.)

The windows I have have spring loaded stops for moving the panes and screens up and down in the track. Are there replacements for these clips as the tiny springs inside the plastic bodies have rusted away?

this is what's stamped, need sash weight range for 17" L, 1/2" W metal, 1 3/32" W plastic bottom, i got S385-17

Thanks for the information on the window thumb guides. We ordered them. On another issue, can you identify the attached photo of a skylight opener. The chain in the case has a couple of stripped links. If we need to purchase the entire closer, that is alight. Thanks. Rob

Hello The following wheels are installed on all my rooms window over 15 years ago. I would like to know if you have these or similar to fit my sliding windows. (They are broken, rusted or missing) and no company or name tag available on the windows. Thanks,

Original Post: D41168 Full view metal storm door with a broken mortise mechanism. Dimensions are Front Plate Dimensions: Width: 1" Screw hole to Screw hole: 7-1/4" Top to Bottom: 8-1/4" Depth (side plate): 3/4" Sticker on upper inside of the frame. G 163 36 X 80 CA N

I only see one screw in picture, and am assuming this is a set screw. Does this part also have an adjusting screw for raising/lowering wheel? Is so, is it located directed below set screw? The Alcan roller(s) I

I am looking for a balance and pivot for one of my windows. The Balance is 17 inches long. I believe it is a ply gem window but I'm not sure.

Do you sell just the key cylinder for Pella storm doors I've lost the keys to mine, and was hoping to just replace that - rather than the entire handle set. On your website you sell a Kwickset key cylinder w/ thumb turn (40-123) - which seems similar (based on the picture & dimensions), to the ... (cont.)

Need to find snap in parts like are in the pictures. The only number that I can find is Series: 70 H3

what type of screws (tread type and size) are used for handle? Thanks!

My house was built in the 1990's I have a few windows with broken locks or handle is broken so it cannot be pressed to lock, the make is sun air, black color.The spacing between holes is 2 1/4".

Hi, I bought from you a Patio Door roller Assembly, 1-1/2" dia, Concave BB Wheel.Item number 81-082 Can you please tell me or send me video how to replace the Door Roller ? Thanks, Alon.