Viewing all customer Discussions for:

Door & Window

I need to replace 24 balances. The balances are labeled with a number. The size listed on the balance is different than the actual length of the part. For example a size 16 measures 17". I think it is a 16" part but I need to be sure. Please clarify. I have the weights for each sash but I do ... (cont.)

I need to replace these two operators, please advise.

Please see attachments and tell me if you have replacement rubber for my sweep. The door has no markings on it that I can see. it is probably 30 years old. I tried some of your Product Code: 58-162 and of course it is too wide to fit the sweep slot and trimming it down will not allow it to stay i ... (cont.)

Attached are 4 photos of one casement window that swings out. It has no lock or latch of any kind. I am looking for ideas. At the very least, I need a lock of some kind for security, but an also interested in any kind of mechanism that can open and close window. Thanks for any advice! ... (cont.)

26D BSI Window Balance TOTAL HOME MAINTENANCE

I have an Andersen window the needs both sash balancers replaced. I removed them and they are stamped with the following EE 4 19 6 68 Which one would I use to replace them with. The window is an older one, guessing the 60's.

I am seeking 4 patio screen door rollers for 2 mid 1970's doors. I have attached 2 photos of one of the rollers. The measurement across the roller body is just shy of 2.25". The roller body is aluminum and the roller is nylon. I believe this is your part no. 84-024. Do you agree? Thanks in ... (cont.)

This part is in an apartment that was build in the early 1970's. There is a #121 inside the part that attaches on the outside of the door. There is a #120 on the part that attaches to the inside of the door. And, there is a #103 stamped inside the handle. The name Dorwal is stamped on the outsid ... (cont.)

Can you help me find a replacement for silverline crank shown? Thanks. Mark

I have some very old looking window casements and some of the operators have either stripped the gearing or have come out of the framework. I have some numbers off the old mechanism but not sure which unit to purchase if they will fit the existing locations? I have one operator out and it show a TRU ... (cont.)

Hi, Farley is Chapt 11 in Canada at moment and not offering parts. I attached photos. I need the pivot bar, balancer shoe, and sash tilt locks. Do you have any suggestions? I saw a pivot bar that might need to be modified, it may work. You probably have the tilt locks. If you don't have the ... (cont.)

Hi, I am trying to locate glazing vinyl for Viking aluminum frame windows from about 1993. Preferably black in color. Can you make sense of my pictures? Thanks, Stephen Weston.

I am trying to replace the item missing in picture 2261 with a part like the one in 2260.

26 3 FR caldwell , Viking window from 1996 ?

I have the following casement window operators that I'd like to replace. could you recommend which product is the right one to buy? picture attached. thank you. -jason

I have the 82-055K for a 1-1/8"-thick door, as recommended by our locksmith. Is the cylinder designed to be filed down to accommodate this width?

Need these parts to replace windows for a customer.Everyone tells me they can't these pieces. I tried to take pictures from 3 sides. Please help!

I had installed many Atrium Windows back around 1992. Our windows that open have a gold tone crank handles on the window. Most of the cranks are now stripped. I am looking to purchase replacements. They connect to the window mechanism by a small screw used for a allen wrench on. The hole opening y ... (cont.)

From off the label: Builder Series 1181 PWG-M-060 I have a customer looking for rollers for this...his are rusted

I have Silverline Vinyl Low E Double Glazed Tilt-In Windows and need new screen clips. Will part 70-123 work for image I included.