Viewing all customer Discussions for:

Door & Window

Length = 29 inches. Stamped "28D" on metal. Appears to me that the top is 19-005 and the shoe is 15-005. But with them broken or attached, I have a hard time telling the difference. Also I have many broken on diffeent windows; windows are all the same height bu different widths. Is it bad to ... (cont.)

The width of your 84-050 screen roller is listed as 0.5" - does that include the pivot rivet? Thanks!

Hi, I have 9 windows like this and all windows need the hardware replaced. Do you carry anything like this hardware. At a minimum I need the crank hardware for all of them and some of them I will need the slider bar that the arms attach to on the window.

Do you have these channel balancers ?

The mechanism is labeled Entry Guard - Truth #20544 The arm is approx 8.5" Long (Best I can measure) Can you identify and supply a part number so I can order it? Thanks, Dean

I just want to be sure before I place my order... The metal part of the sash measures 27". The stamping on the side is as shown 26-D-40. It appears to be a 351 series sash; however, I have no idea which option I should choose. I saw another poster post a similar question with a similar stamp ... (cont.)

I have a balance with markings 26 DS 45 PT BSI. The metal channel measures 27" by 9/16". The window measures 27" tall by 50" wide and is very heavy, Maimi-Dade code hurricane impact version. It has 2 springs, one inside the other, looks like your 385 series. Any chance you can match it? Thanks. M ... (cont.)

Pleas let me know what you think. I will need two. Also this window frame DOES NOT have side clips so I'm not sure how re-install these balances. Any ideas?

Hello, I'm trying to get this counterbalance, but unfortunately I have no idea what the brand is. My window is missing one I would appreciate your help. Thanks, Edgar

The window mentioned above has a hinge on the lower sash left side of window when looking at it from the inside. These vintage windows (1980's)are very common in central N.J. The channel balance on the hinge side is broken. I cannot remove the window to weigh it due to the fact that the hinge is riv ... (cont.)

Hello, One of my window latches has broken. It's the bar at the top that it pivots on. Unforutnately, due to age, I need the whole latch. Any idea which part or parts would solve my problem? Thanks

Good Afternoon, I'm enclosing the picture of broken part that I need to have replaced since it broke. I had to close the door and now I can't even open it. As far as I can see the number on the piece is 62/35; I was looking on your website and only saw one piece which is the closest to the one ... (cont.)

Hi I would like to know if you have the following window balance available: The balance is stamped 1540. It is 16 inches long not including the top and bottom attachments. The width is 1/2 inch. Attached are the photos of the actual balance and serial #. Thank you.

The 1st picture has the stamp of 10-8303. I could not find any other markings. The second picture has Stanley on the handle and a number 359 on the extension. Please let me know if you need more info. thanks

Got these off neighbours' door, and tried to fix. Wheels are worn down so no go. Body part 1 1/2" long x 3/4" wide x 5/16" deep. Spring loaded wheel part is 1 1/2" long x 7/8" wide x 9/16" deep at wheel, it is crimped to 1/4" to fit inside the body part. I can see no names or numbers on the part, no ... (cont.)

Hey do you sell the matching interlocking piece for this part: CAVCO Pivot Shoe Product Code: 15-035? I've included images of the items and how they interlock. All these plastic pieces are damaged, I will need to order both the pivot shoe and the interlocking piece that goes on the bottom of the ... (cont.)

Looking for Surface Mounted Latches For Tilt Windows that have 2-7/16" hole centers, 7/8" wide, 3" long and 5/16" tall. Edward

Good Evening - I have a weather strip that was torn off closest to the window lock. The window is approx. 4.5' in length. I've ordered from your organization before. I am impressed with your service and execution -- exactly why I am back. Thanks for the help!

Can it be used for a 45" (22 1/2" operating/opening width)wide sliding window?

A label I can partially read on our sliding glass shows Norandex,Inc., but I cant make out a part number. So, do these parts match any of your inventory.