Viewing all customer Discussions for:

Door & Window

Does the 26-266 and 26-267 come in beige?

Do you have a guide to install this? The straight lock mechanism is too long...do I have to cut it shorter to fit inside the opening?

Hi there! need some part and i have the number 27e .please let me know what to order Thanks! Attila from Clean bay llc

I have 3x6jordan window non tilt. I need the stops for window balance. They are mounted on top of window with two screws. One on each side

I ordered S200-19 because the description fit my tube dimension. It was 11/2/10 but I just got around to needing a replacement. Surprise! They are not the same as the original. My original balances have 19" tubes but the rod is 1/1/2" longer and the foot tips are 7/16" wide. The plastic cap is ... (cont.)

The spindle size on my Forever door measures .32" across. The description for the 40-150 indicates 1/8" or 3/8" spindle. Will this work for my application? Thanks!

In 2005 I had a new storm door installed on my home. This week, the exit push piece broke. I disassembled it and found that the set appears to have been manufactured by Ideal of Canada. That company referred me to you, since you're located in the United States. The handle has the following inf ... (cont.)

Pleasse tell me the overall length of the lever of this operator

My channel balances are 22d usb and 28c usb, i ordered the 380 series 23 inch and 29 inch balances based in the actual length of the metal part of the balance, did i order correctly ??? thx

Does it matter if I use a 390 series balance designed for a heavier window on a lighter window. Also my top sash guide measures 1 9/16" in length. The closest I can find here is the 18-009 1 5/16" the rest of it measures the same. Will this be a adequate replacement? Thank you.

Will your 1 1/4" roller work OK to replace a 1" roller or are 1" rollers available for 84-016.

According to the measurements on your websites 39-089 was the replacement part I needed. When it arrived it was obvious that it was not. They are 5" but the arm length is different. I am attaching 2 pic in the hihopes that you can help me identify the correct replacement part. Thank you for your ... (cont.)

My vinyl windows had vent latches that broke. the size of the opening is 1 1/16th long and 3/16th wide could you please tell me what products would work as replacements. Thank you Petre

I'm looking for replacement rollers to fit a vinyl patio door made by St. Clair Corp. They have side adjustment rollers but I havent removed door yet to measure dimensions . I work for Binswanger Glass and I'm trying to help a customer. Thanks, Ron

I want to replace lower door roller assemblies that look very similar to part #81-090, but my assembly has a plastic rather than metal roller. Do you any parts like 81-090 that have plastic rollers? Also I am looking for a top roller to replace the one pictured below. do you have such units? Than ... (cont.)

I have been looking for a levered handle similar to your 39-069, 20 1/2". The old is long gone but I would like to replace it. It belonged on a Lockwood garden patio door. Unnfortunately, the long bar on the handle broke off and the people just threw it away. My questions are: 1. With new advance ... (cont.)

trying to replace a window crank that has broken. very similar to the 39-025 BUT the bottom hole spacing that is 1-1/8" on the 39-025 is is 1-3/8" on the broken one. the link also measures 2-3/8 rather than 2-1/4. the 5-1/4 checks. note also that all the mounting holes are just inside the cast ... (cont.)

House built in the 1950's has awning and jalosie windows that appear to need new hanlles however i don't have a clue as what to order. Can turn most with pliers but set screws are worn on most

Do you have a replacement for this roller? What would the price be for 100?