Viewing all customer Discussions for:

Door & Window

I am having trouble locating these hinges. There are no identifying marks or numbers for me to reference for replacement.

Hi. Looking to replace this defective window crank. There are three or four that I will eventually need to replace.

Greetings. I’m in search of some cross referencing assistance with replacement balances for Pella DH units from the 90’s (a great period for music but apparently not for Pella Windows). Suggestions welcomed. The black plug slides into a hole in the side of the sash and is held in place b ... (cont.)

I need both pivot pins that would fit in this sleeve. Right side and left side. Pins are missing entirely so I don't have pictures of them, just the sleeve

Need help with part number for the 2 pictures below. 2 different size window

I'm guessing that the originals are no longer manufactured. It looks like there are a few possible options on your wesbite, but hard to tell which would work if at all

Hello. I just ordered product 39-239C Encore Awning Operator from you. I also need a hex head adapter as the window is too high to reach by hand. Please see attached photos. Do you carry this adaptor? What would this adaptor be called? Thank you.

I am looking for a left hand replacement night latch (preferably, but I'll accept one that is not) for this Better Bilt tilt window. House built 1996. Can you help? Thanks!

Hi, I need to replace some glazing strips for my 1996 vinyl windows and want to be sure I'm puchasing the right ones. I've attaced to 2 labels found on all of the windows, and also a couple pictures of the outside of the window with the glazing strip close up a further away. Thanks in advance for ... (cont.)

The metal part is 28" long. The writing stamped on the part that needs replaced says 27-16 CF5 CMC, and there is a sticker with a bar code and some additional writing that says 2716SB Batch 7250 Bin 2-A08 (see photo)

#3435 Thank you in advance. Cory

Sorry our door stopper/lock broke and this is the only picture we have of where it was mounted to the door. It was a white box with a spring and plastic stick inside that when you press the buttons on the box, two metal pegs would either insert to lock or come up in the box to unlock. We need this r ... (cont.)

I figured that these are s380 rails 29” long. But the only stamp on them is 28C so not sure on the weight rating to pick. Aaron

See photos for model #

I'll have to follow up with the rest of the photos.

Single-wheel, 1-1/2" diameter. Front height where adjusting screw is 1-3/4". Del Mar name is visible on one side. Can't see part #. From home built in 1976 (we are 3rd owners). Need possibly 8 pieces (4 doors with 2 wheels each on 2 different floors)

HOPING YOU CAN IDENTIFY THIS BALANCER

I have 3 windows form Seasonshield Window out of Georgia, i need to replace the ballances, and tilt lock relases. The windows are double hung with fixed top sashes. window 1 4 balsaters are 35" in lenght with no ball on the bottom the window size is 30"x 33" , there is 4 ballasters working ... (cont.)

Photos attached. The catches are integral with the upper window (i.e., no easy way to remove it, except from the inside). I could: replace the latches only. I can see there might be a few that might work, but I'm not sure what will "catch' properly. Or I could put new latches in. If so, there is not ... (cont.)

Hi, I have channel balances from 1980. The top plastic fitting on mine do not exactly match the photos of the options shown on your website, although the "option" available is 2320 which is embossed on the channels I have. I just want to make sure I am ordering the correct ones.Thanks,Rodney ... (cont.)