Viewing all customer Discussions for:

Other

Looking for a bi-fold hardware set for a 4'0" wide mirrored wardrobe door manuf by Stanley, pics enclosed thank you

thank you in advance

I need to replace 5 right and 5 left truth entrygard operators. The # on one is R30842. I am sending photos of the old operators. It looks as if I need # 39-032 & #39-032 operators. I have a photo of each. Please let me know if this is correct.Thank you??Mark

The only thing that's written on the inside is sash controls Canton SD. Patton d 466787

I need what depicted in the photo,but i use a 6ft pole with hook to open my windows. However these window locks break due to their not made to be used with pole.My wish is that your company has a heavy duty one that i could just swap out for the existing ones i have.Thanking you in advanceRobert ... (cont.)

I have several of these little plastic insert pop out window safety locks broken. Do you have a replacement? There is no name brand on the windows I can see, only a barcode with 52-3508-WHT

Looking for these rollers that are from a very old glass sliding patio door. No part numbers or markings are on the assembly.

Balance for non tilt aluminum window 3620, metal balance length is 37". I need 4 of them.Pictures are of top. Will send additional pictures of bottom.

I've enclosed door info and hardware photos. Please send info on replacement parts and cost. thanks Phil

Looking for replacement glazing

hi Im lookin for this milgard window hinge Thank you William

Single hung aluminum sash using block and tackle balance. The nylon part at the top corners of the sash serve to capture the block and tackle when the window is pulled down. The sliding tab slips into the block and tackle end cap to prevent accidentally disengaging from b&t when sash is raised to it ... (cont.)

Hi, I have this plastic on both top sides of the wooden window that used to engage with the channel lock. No idea about the window brand. Could you help to identify it?

Need the pile weatherstripping, the latch, and the bottom weatherstripping. Pictures attached

Hi, Looking for attached glazing bead. Remove small IGU from bathroom and noticed that there was glazing tape on both sides of window. Would anyone know best way to install glazing bead with glazing tape. Do you put glazing tape on window first and slide in bead or put glazing tape on back of be ... (cont.)

I need a total of 8 of these. These are the pictures of those that need to be replaced. No, they are all not LH but I would like to confirm that the size is that of 26-390 or 26-391. Thanks!

I have two older General Aluminum Windows. I am needing to identify the tiny face clips on the sash. Do you sell anything like this?

I need a left and right Mastic tilt window latch that are 3 1/4 " x 1 1/2"

Channel is 28 inches. nothing printed on it, window manu not known, the channel is a 1/2 channel. I will need about 6 or 7.

I need to replace rusted roller assemblies for my glass sliders. Their dimensions are approx 4.5" long (main body without screw attachments), height 1.5", and width of slightly less than 1.0". I saw a product on your website (product Code: 81-156) but you do not list the length (all other dimens ... (cont.)