Viewing all customer Discussions for:

Other

Hello,I'm looking to pick up a few sets of replacement wheels for the sliding glass doors in my Eichler. Do you carry it know of replacement wheels that are equivalent to those in the attached photos?Thanks for your help.Best,Mark

I have 3 left and 3 right Windows that will crank out, but not back in. I'm assuming i need new operators. They look like Truth Entryguard Dyad, possibly. I think my handles are fine

I couldn't find this model number to replace the balance. the number engraved is C23 6#31 10-85 Also do you sell the sash replacements?

The inside handle broke inside and need a new set. Looking to see if I can get a replacement but sounds like they are no longer made. Looking to see what would be compatible with it or similar

Hello, the attached photos show my lock. The deadbolt works but the level lock does not open. The strike will not actuate. The lock mechanism is about 10" from screw to screw. The edge of the lock mechanism is stamped "G-U". Is there a Swisco replacment? Thank you

I need tilt latches replaced on the window

Hi, I have a ?15? year old PeachTree wood slider that I need a new handle for. The mounting holes in the door are 5.75" apart (Top & Bottom).Can you suggest a handle ?Regards,Rick

I need a replacement for the latch on our rear sliding door. I do not know who manufactured our door, but after about 12 years, the door latch actuator on the inside of the house broke off. The markings on the door glass are as follows: CTG TEMPERED 16 CFR 1201 II SGCC 1804 1/8 U I have added ph ... (cont.)

Hello, hoping you can match the broken handles I have. Dimensions and pictures below/attached. I'm happy to modify as required, i.e. if the screw holes are not identical. Thank you. Window lock handles Screws 2 7/16" Opening 1.5" Bezel 3 5/6" Lever 1 5/8"

Old Castle is stamped on the window. I think I need P/N S385-29 (both sides) and definitely need the sash stops that screw on the window itself. "28D" is stamped on the sash. 265-2 5E is also stamped on the sash hardware. The nylon stops on the window are broken. Thanks for your help with the ... (cont.)

Pictured are guides for 2 different size windows 2nd marking is 2990 hard to see in picture should I just replace both sides on each at the same time?

I am looking for the top right ( looking at back of door) guide and bracket for sliding mirror closet door

Hello experts,There are no names, numbers or markings on any of the parts, as I can see. The window sash weighs 20 lbs. It's a single coil apparently, half-inch wide. Thanks in advance for your help.-Zhaolai

There is a number stamped 2120 bs1

I have Alside windows from 2003 which several of the shoes have broken. They appear to be the 15-177 you offer, but please confirm. The coils seem to be fine, so is there a reason I should replace these too. Also, my windows are generally hard to open and "sticking" as you lift them. I used sili ... (cont.)

Need a replacement balancer. See photos. Length is 27". Thank you

Is top swimming door guide

I have included 5 photos of the item I need. Please let me know which product number I should use in ordering from your company.Thank you for your assistance.Kathy

596. 298.91.00 made in Germany. Our Wellborn corner cabinet hendge broke and we are trying to find the right henge to replace it.

The door strips on my Chamberdoor have become brittle. Apparently, they have gone out of business. Attached are 2 pictures. The O.D.s are 3/16" x 3/4". Can you recommend a replacement set of strips?