Viewing all customer Discussions for:

Other

Need to replace these in my friend's window. Did not measure the length but can get that if needed. Thank you, Michael L

Hello, Do you recognize the window balance in the pic and do you have a replacement? Thanks, Dave

please oh please can u help me identify these parts

This part mounts to the top of the actual window and seems to serve as a guide. It's in poor condition but I was unable to find one in your catalog that matches the part. I also need the bottom guide for the same window. Pictures attached. The balance spring has "05/22/04 Unique Balance 27D" printed ... (cont.)

Need 4 new balances. Thanks for the assistance in determining the proper part.

I'm looking for 2 window channel balance replacements.

The latch on my Andersen sliding glass door is not working and I need to replace it. For some reason the latch will not move when I turn the handle. I estimate the door is about 25 years old. Any assistance would be appreciated. Thanks.

this is a 1" long vinyl roller with small tabs on each side. Brass flat wheel.

Aloha ! I have some sliding windows that have plastic covers similar to your 90-253 units. mine, however appear to have pegs as opposed to the bar yours have in the photo.

Looking for replacement channel balances for non tilting Viking sash window. The number on the balance of an identical window is 2030 BSI 0B. The metal bar not including plastic parts is 21 1/8 " thank you.

unfortunately no markings on it, believe they are custom, looing for something similar that will fit. Looking to order 12

Need to replace what is shown in the picture. Can you tell me if your Product Code # 10-098 would be what I need?

I think this could be replaced with your part #39-002, a right swinging operator.

Hi,I need to replace a pair of 18" channel balances for a hurricane proof window weighing quite a bit and I am not sure which model to choose. The only references I know are : Channel Balance Top, New Security 19-041 and Channel Balance Shoe, Winged 15-005.Which model do you recommend?Best regards,T ... (cont.)

I bought item 40-150 and it looks good, but the existing handle bar that passes through the door is too large to fit in the new latch. Inside handle 1-3/4 white. Is there a way to adjust this or remove the internal bushing to make it larger or do I need a new part? Please advise. ... (cont.)

After further investigation, it appears that the top has a metal pin, with the plastic Cap. The top hinge is in good shape. If the lower pin is intact, all I would need to do is to change the plastic Pin Cap. If that is the case, are your experts thinking that the replacement Cap would probably ... (cont.)

I cannot find the correct part.

Hi I'm looking for a replacement sash balance for an Andersen window. On the part there are two different numbers, one is "11600-17" and the other is "BF 10#31 9-86"

I need to replace missing window channel. I sent number on channel and picture of whole channel.

I am looking for the interior latch, black, for this door. My registration number is included. Can u help? Thanks , john