Viewing all customer Discussions for:

Other

I need to replace Caldwell Channel Balance. Part number located on Balance: 31 3 IP CALDWELL I measured physical length of channel: 32"

looking for replacement for cole sewell handle part#HD-650 ---also under part#303091----mainly need inside handle but may be part of set

I don't know the manufacturer of my windows. All of the balances are 22"long by 5/8" wide by 5/8" deep. I'm not sure what the end pieces should look like as mine are broken. Thanks.

Aluminum channel is 20?. Overall length is 21? including plastic parts

what kind i neet?(old balance is 2420X)

I have released the side pieces and pushed the window past them but can not angle the window to remove it

29 x 19 3/4 I need the balance

Good Morning, Looking for the replacement rollers(2480054) for Windsor Pinnacle Clad Sliding Door. Thank you for any assistance - Best Regards, Mike

Hello, I've narrowed down the window balance replacement that I need to either the S380 or S385. The only issue I'm seeing with the balance I took out of my window is the bottom shoe appears to measure 1 1/16 so it's right between the two available options. Do you recommend to go with the 1" o ... (cont.)

The wire broke one the bottom window I need to replace both left and right balances Can you quote me the correct ones

commander stanley 00 5024 patent pending combien quelle prix pour 1 morceau ou achat de plusieur morceaux reponse svp

this is on the stickers on the glass casing. SERIES: 5621/3631 AAMA/NWWDA 101/I.S.2-97 SGD-C30-96x96 SGD-R20-189x96 SGD-R20-141x96 Daniel

looking handle set to front interior door with 1.5" bore hole.

The length from the bottom of clip in window frame to bottom usable hole is 22" Picture 2076 has 2340 BS1 or BSL on it. The channel top is 1/2" across. I need to order two of these balance channels.

Hi, I need a replacement window balancer for my single, hung, non-tilt, vinyl window. The window is about 15 years old. I don?t know the brand as there are no brand markings on the window and I bought the house 8 year?s ago with the windows already installed. The metal part of the window balancer m ... (cont.)

Looking to replace channel balance for a pgt sh 4000 window. Non tilt window, bottom sash is 37x50 5/8 inches. Window weighs aprox. 20 lbs. Also, the channel balance is 24 inches long.

Opened window and then it wouldn?t close. Then I noticed that part of the white string was hanging out the top. Figured out how to take out the spring and got it out of the window channel. I probably need two of these, just in case and wiill keep the old one that works as a spare. The one that ... (cont.)

Need two replacement balancer. 33 inch long 1/2 inch wide 1/2 inch tall 32 9 cr Caldwell

I am pretty sure the replacement is series 390. On the existing balances the o only markings are 21 A and 21 B. Does this suggest there is a right and left balance?

I need to fine four of these, any help will be greatly appreciated. The part has no identifiers any where on its surface.