Viewing all customer Discussions for:

Other

I need 10 of these operators and probably new tracks as well.

The casement windows were installed around 1990 and I don't believe the weatherstripping has ever been replaced. The stripping is somewhat dry rotted but the sash stripping is the "L" shaped insert and the jamb stripping is a bubble insert. The insert [part on both appear to be 1/4". The only ident ... (cont.)

I have a semco window that needs a balance replacement. window 36" X 58" 25" glass heighth. Thanks Rich

Looking for this window slider.

Hello Swisco Teams ! I have old windows and pivot shoe is hides by plastic molding and travel up/down with window sash I need to know what is pivot shoe is ? Thank you.

# ON ARMS, 01 216S, AMS, EAGLE WINDOWS, WDMA, SERIAL #MBSV260-091916-0005

Hello my name is Iris. I'm in search of a Window balance. If you can please help I'll appreciate it. Thank you.

Hi, I am trying to identify this balance to see if parts are available to replace.

I need set of rollers for screen door made by Sunrise

I ordered the following replacement part for my window based on a previous correspondence with your company (39-220B : Encore Dyad Sill Mount Operator, LH). Unfortunately, the part sent to me was not the part needed to fix the window. I attached pictures with me pointing to the actual part that was ... (cont.)

Attached are pictures showing a flip-out security stop in place and the slot where one is missing. The slot dimensions are 1/4" by 1 7/8". Can you supply a similar mechanism? I would be interested in purchasing 10 of such. I need four but believe it would be wise to have a few more on hand. Tha ... (cont.)

I'm in need of the sash balancing parts for the lower sash of a Certainteed double hung window. I'd like to purchase the coil balance spring and pivot shoes for both sides of the sash. Please let me know what Swisco part numbers I should order. Thank you!

Looking for the End Cap for Sliding door security bar

Length of the metal is 32" . 32 D BS1TR was stamped on the metal

The coil that is not broken has a 6 on it. The other smaller diameter broken coil has no number. I'm not sure where the piece that broke off went. I also wanted to know how to reinstall and connect coils.

I need a 1/8th inch backing (0.125) with a pile height of 3/16th inch (0.1875)... Any luck you may carry this? The 1/8th inch width is the issue and I've been searching a while. Thanks, Joe

One of the posts that is welded to the window frame for a Living brand window lock broke, and the latch won't lock. Is there a part for this that I can jb weld onto the frame?

I need to repalce 8 of these and I can't seem to find this particular balance. Is there a replacement that would work in its place. It did not have any metal around the balance as seen in the other balances available

A Number on the part: 3230 Length of the metal part 32 5/8 inches

I have two old cabinets with double bifold doors as shown in the first image. The doors are not restrained, so they tend to flop out when opened as in the second image. The trim around the doors hides magnets, which hold the doors tight when closed (4th image). I would like to add tracks much like ... (cont.)