Viewing all customer Discussions for:

Other

Peachtree patio door screen track - need to replaceDimensions of vinyl track - middle rib that roller sets on is @3/16" high -vinyl track is @ 1/2 - 9/16" wideLength is @ 68" color is tan/beige

part #4449

Attached are pictures of my window, a 49" x 36" (x 2) each double hung metal The bottom window falls if I raise it and let go. What Parts do I need?

Where can I get this part replacement like the uploaded photo ? Thank you so much!!

I'm sorry I don't have a photo of this on the window. I think this is from a Polaris Ultraweld window. We finally found one but it came without the set screw. Could you possibly identify it and tell me if we might be able to purchase from you?

Hi. I'd like to replace these rollers. The door gets major exposure to the elements, so I'm open to suggestions, as there's a bit of rot where these rollers are found. Thanks, Mark

Hi I Need to replace spiral window balance for non tilt window. 25" long, 5/8" diameter, approx 9.2 lbs. I also need to replace the piece that goes into bottom of window, foot? Brake? Metal piece a little over 2.5". Advice on exact order number appreciated

Hi Can you advise me as to which screen spline size to use on an Andersen window screen. The built in spline was aluminum: about 1/4 inch deep and 1/4 inch wide. I have your 250 spline which seems too big. I'd appreciate your response. Thanks

I have 32"wx16"h Insulate(Ply Gem) awning window that needs arm needs to be replaced. Please help me me find the part.I am in Hawaii and 6 hours behind you. Thank you.

We need a pair of these (for starters) 28 inches long with a depth of 1/2 inch to hold up a 16 pound window. Uses a hook style fastener as shown in the photo. Any guidance you can provide would be appreciated.

Hello, I'm searching for replacement window nailing flanges for a Craftline window. Could you be able to help me?

I have 14 year old Champion Windows and one of them has 2 broken springs. I was able to correctly identify the replacement shoe #15-177, and selected spring # S152-7 to go with it per the comments on the part description page for 15-177.When I went to select the spring, the photo showed a straight ... (cont.)

I am looking for replacement rollers for a Four Seasons Sunroom sliding glass door. No markings on the rollers. I have tried a other rollers but when installed, the wheels would not clear the sill of the track.The side panel of the door frame has a sticker with Series 230 SGD SGD-R20-73X81 ... (cont.)

I need a replacement handle for this PGT sliding door. Numbers on the inside of track are: SGD 470-570 panel Do know which part in need to order?

I am trying to locate replacement corner connectors for my casement window screensThere is a little corner notch on the inside to accommodate the splineLarryThanks

I have a double casement window and the hardware was made by Wright. The casement window operator is Wright Part # 7702. I need two new handles. What are the best fitment handles that you carry for a Wright 7702?

I am searching for a shower door bottom vinyl spacer that snaps into the door. Two photos are attached. Thanks.

Hi Experts, I have old Caradco hardware on all my casement windows and am looking to replace one set of hardware that's broken: - One window lock, see pics IMG_1752 (front) and IMG_1748 (back). Number on the back side of lock is 40223 - One window crank and cover, see pics IMG_1742 and IMG_1741 ... (cont.)

the pivot shoe I order is too small it should be 9/16" wide by 2 5/16"" height by 1 1/4" width. I had gottenhelp before and told some one these measurements and they told me to order 15-173 but it's wrong. Itlooks like 15-129 what do you think? Please advise.

Hello, I am attempting to replace the handle and lock on this sliding glass door (see pictures of the door with it all removed). I have no idea who the manufacturer of the unit is nor do I have pictures of the old handle (unfortunately). The hole spacing for the handle mount looks to be about 4.5inc ... (cont.)