Viewing all customer Discussions for:

Other

As per my chat with a Swisco help desk rep, this am, attached are pictures of the window parts I need. There are two pictures of each part. One is totally broke, the other seriously cracked. I need one for the left hand and one for the right hand side. Please let me know if you have them or someth ... (cont.)

Facing window from inside, locking mechanism on right side. Part is 34 1/8" long Andersen window, lifting and lowering handle broke

Number on plastic says 7191-33

Looking for this part for wood double hung windows. The tilt pivot bar. Looked on your site for side mounted pivot bars but could not find match , notice pivot stud is not rounded or square. i believe they are Marvin windows made in 2004 as the glass is etched with a "M" and the manuafacture date ... (cont.)

I think it looks like a 395 channel balance the stamp we see is 1669. The window has 2 on each side

SWISCO Parts: I have some PGT "WinGuard" Single Hung aluminum windows that seem to be missing bottom sash guides. In the picture they are the plastic part that slides over the end of the sash lift rail and keeps the sash aligned in the frame as the windows are opened and closed. The windows were ... (cont.)

I am looking for replacement parts for Pella Slimshade blinds. We have these in every window in our house, installed in 2004. The windows are all casement windows of the Pella Designer DGP series, now completely discontinued by Pella. I have 2 windows where the blinds do not properly tip forward or ... (cont.)

Balances are a tiny bit shorter than 27" long, 5/8 in diameter, and have a blue tip. The white exterior is plastic and there is a plastic sheath around the coil inside. Thank you so much.

The plastic seal between two screen doors. It's 78 inches long 3/4 inch wide and 3/8 inch deep.

Cabinet Side: Made in Austria 5651895000 Door Side: Made in Austria, 3X065

I am trying to figure out which one I have it's a spiral balance but that tube that was around. It was plastic and or disintegrated and it looks like a white tip and it's 30 inches.

Hi Experts, Needed your help in identifying the best replacement or buy the whole set to replace my patio door handle. The current model had its exterior handle broken. Please refer the picture in removed state.

Looking for a replacement handle set for this door.

provia dh267 venice storm door hardware

Good Evening Parts Team, Hope everyone is doing well. I recently ordered some channel balances on Order number 2096036 for part number S390-27 channel Balance and now I need to replace the balance stopper. Attached are some pictures to reference. Let me know if need any additional information. Than ... (cont.)

her windows/doors are about 35 years old

Right hand operator with one do you suggest

Do you have this part?

Need two new Philips channel balance rails. Part#: 13-4 IR Caldwell Channel length: 14 inches Please see attached images. Thank you.

I have a Simonton 70073 DH window that has a broken balance assembly. I would like to replace both. I beleve they are the coil type. I have added pictures.ThanksChris