Viewing all customer Discussions for:

Other

My window do not stay open? and this piece, in the picture, are broken.

Name on the wheels says Production Enterprises Miami Florida, but I am unable to find a model or part number

I have new construction certainteed windows from 1996. I am looking for the sash tilt latches for the lower sash. And also the security stops which are installed on the upper sash Thanks Dan

Hi I am looking to replace the channel balances aka tension springs on my up/down sliding window. The company that installed the original window no longer exists and I checked the model of the channel balances is "07/08 UNIQUE 18-C-90", as shown in picture_4. I wonder if other channel balances can ... (cont.)

Hello, I have Nusash windows from 15-18 years ago. They were installed from a previous owner, so I don't much info on them. The tilt latch mechanism broke and I am trying to match up a replacement. This if for the left side of a double hung vinyl window. Its about 7/16" in width, 2 5/8" in length an ... (cont.)

Attached are photos of parts from door. Both do not work, Will no longer adjust. There are no marking of any kind on them. Description of the parts is in the one photo with measurements.

The stamp on the BSI part says "26DS 45". I would like to know what part I need to get as a replacement.

Hi, I have these double hung window and very hard to open/close. Currently there are two spiral balances on each side but can't tell their length. The sash is about 58(w)x36(h). Is ot possible to replace with single spiral balance on each side and or replace with other counter balances that make i ... (cont.)

Was changing my window screens when one of my window tilt latches broke off. I can't find the same part and was wondering if this part is even in production anymore. Closest measurements I could find were the 26-243 and was also wondering if this is a good replacement

My problem is that I am missing the key to this lock. I would like your input on how to resolve this matter.

Hi. The casement window opener no longer will operate. I removed it and have attached photos. It is stamped with U.S. Pat #4505601 and there is another spot where it says 45142. It is a Truth part from, apparently, 1986. It has two spots where it fastens to the window. The length of the cross piece ... (cont.)

I can only find the letter C stamped on the spring. The window weighs 11 pounds with a bathroom scale. This is a window put out by Erie Construction, approximate year 2000. If you are able to identify what will work, I have another window that I will take apart and have to order springs on. ... (cont.)

need to replace these two rods. They appear to be black nylon bushings and are 29"x7/16

Hello: we need a replacement handle for our window we think it is the Hex handle however ours is grey or putter in color not white, is it available in other colors? Kindly advise, Thank you Yvonne

Hello. My name is Brice. I have ten windows made by Roto with broken cranks that need replaced. I purchased my home a few months ago, and I can tell the eight other windows in my home have already been replaced. I have a conglomerate of parts, but I am missing the correct hinge set. The original is ... (cont.)

The metal part of the Channel is 28in long, 1/2in wide. #2720 is stamped on Channel. I think your S395 Channel is the one I need. What do you think? Regards, Brent

Im looking to replace a broken track for a casement window. As you look from the house outside it is the right window. I cannot open it as the track assembly has broken. Attached are several pictures. I want to replace the upper and lower assembly and the 2 window cranks which are white. ... (cont.)

i have older vinyl windows with a half moon shaped clip that allows window to be opened when pressed down; trying to identify who makes it

I have 6 windows that that have these cranks they will no longer crank out or in. Please identify part so I can replace the window cranks when I use the crank it just spins.

Sticker on window says Econover believe from Quebec Canada. when we crank open several windows they fall off the hinge in photo 1 on top of the window and we have to reattach the arm to the little button it sits on.