Viewing all customer Discussions for:

39-092 ROTO Casement Operator

Hello I'm Charles and I'm hoping you can find me this part or something compatible. Left and right.

I am looking for a folding operator handle. It is for a Milgard Window, casement window (series 3510, product line # 032-167) and the handle should have the part# HL0201WH (white). Can you tell me where to best buy it?

From my customer :I wasn't sure what you meant by the longest and secondary arm. But the long part of the metal arm on the left was 5.25 in and the short part was 2.5 in. The metal arm on the right was 5 in.

Hi there. Have casement window winders stamped Roto, Made in New Zealand on the back, and the model number is I think (not very clear) P-4000 For three windows, the plastic connection that connects to the winder spindle has stripped, and I need to either replace the plastic part (see photo - in for ... (cont.)

Hi... We've got a Milgard casement window that's about 15 years old. The crank mechanism has cracked and needs replacement. Is this something that can be done? Thanks... Jay

I have casement windows that have broken cranks and one window with a broken opening mechanism. Here are the pictures of the mechanisms on the windows. I am hoping you can help lead me to a replacement. Measured from inside, the longer arm is approximately 5 inches and the shorter arm is about 2. ... (cont.)

Trying to find suitable replacements for these casement cranks. Only have these photos as reference, i know its a long shot but i was hoping somebody may be able to match them based off these bad photos. thanks for the help

Hello, Looking for this casement arm.

Operator ID request

Can you see what I need for this fix? Can you take a look at this? One picture is the left working window. Other picture is on the left, missing a piece.

Trying to find crank handle replacement. "Certain Tweed" vinyl window House built in 2006

The crank system on our milgard casement windows has stopped working (appears like the internal gears are totally worn down). Would like to buy a replacement part and fix it.

hi. i would like to locate and purchase some Milgard series 3510 casement / product line 032-167 window operators to replace my broken ones. they feel "stripped" and will not open the casement windows any longer. one casement window is 35" wide x 37.5" tall, and another one is 35" wide x 49" tall ... (cont.)

Kitchen window. Right side (from interior) open. Crank stops and gets stuck before closing. Which crank part should I order?

Is 39-092 the right replacement for the attached image? Thanks!

I am looking to buy 4 of these handles for my Casement window Operator (Milgard series 3510 window) with 5/16" spline. The spline has a hex shape. Not having much luck looking online. Do you have something that would work? Thanks.Dan

Will your casement window parts work on wall side replacement windows and if so which ones would you recommend the hinge bracket broke away from the operator. I have 2 of these windows and both are bad Thank you for your time Dan

I'm look for a similar operator That o can use it to replace the broken one

I believe my bronze, right 20 wide x 44 tall casement window is a Superior Window Products. It was installed in 1997. I believe that Superior Windows was acquired by Atrium Windows (aka Hr Windows) in Texas The riveted stud broke off from the stud bracket. The crank assembly works fine. I would ap ... (cont.)

Roto engraved on bottom, installed in 1998.