Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

Hi,I would like to get a new operator. The numbers on the operator don't seem to corollate to anything. Any help would be apricated.Thank you,Mark

I have a broken LEFT Single Arm Roto-gear Operator for Marvin Window Frech Casement window. See photo. Marvin no longer makes the part but tells me it is Marvin LH part no is 10814810. Do you have such a part? regards, B. Bates

Hello. Do you have a replacement operator cover (part #) for my Vetter casement window?

Hello, Swisco - I built my house 30 years ago and used fibreglas windows manufactured by Corning. Their window division went out of business not long thereafter. Now one window does not open. When the crank is turned the helical gear backs out. It appears to me that the ring that holds that gear ... (cont.)

Greetings! I'm trying to repair a Crestline Casement Window that was probably installed in the mid-late 1980s. The glass dimensions are 24" wide by 42" tall. One arm is labelled "Entry Gard Truth". One crank arm has the number "20810" stamped on it. One crank arm has the number "31538" stamped on ... (cont.)

Hope the photos are big enough for you to get the numbers. Any help is much appreciated.

Hi, Hope you can assist me. Im looking to find the model / spec for encasement window operator. The brand written on it is 'Truth'. It appears to be 'in' the sill, I think it is dual arm (has 2 arms), and I believe it is left open. Any assistance would be appreciated!! Thanks, Julian ... (cont.)

Please help me with product identification. The unit is good, just my crank seems to be the problem. Should I replace the entire unit or can I just replace the crank.

?Do you have a replacement for a Marvin 3248 casement window operator crank assembly? I purchased the window in July 1989 and the gears are now stripped. It opens but doesn't close. The assembly arms are stamped "Truth."

The stamped numbers are close to a few that I looked through L30841 LH30470 But measurements don't match

About 25 years old. Says Caradco on cover and Truth on inside of cover. Widest point of cover is 5" long. The stem (or whatever it is called) that turns the sprocket wheel just sort of corroded and crumbled.

Hello I am looking for a part number for crank handle and the actual operating arm per the attached pictures below. This is what it looks like without the cover.

I have two windows needing replacement parts for R split arm crank mechanism probably installed in 1988 when the house was built. The only id seen is the logo Truth and a number 20810. Can you please help me find two of these parts?

It is stamped as Truth 45275. The arm is stamped with 40267. Total arm length about 9.5" 4.5" from the end to the bend in the arm. Thank you!

I need crank covers

Hi Swisco- I'm looking for 2 styles of Truth operators from the 90's. What makes them unique is that they they have a mounting base that is only 1 1/4" deep rather than the current entrygards that are over 2" deep. I will attempt to attach a couple of photos. I need left and right straight arms an ... (cont.)

We moved into an old house at least 80 years old the window cranks are broken. The picture hopefully should show you what you need and the name on the arm was entrygard truth. Thanks Ed

Our Wilmar wooden casement window (around 28 years old) won't close once opened. The device appears to be stripped. Wilmar is no longer in business. Have been told we need to replace the entire mechanism. Prefer bronze to match others. There are two arms connected to the device. Not sure wher ... (cont.)

The only markings I see are Semco on the crank handle and EntryGard on the crank arm. Hope that is enough to match. Thanks!

Hello, I am just looking for the cover for the crank mechanism. Thank you!