Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

About 25 years old. Says Caradco on cover and Truth on inside of cover. Widest point of cover is 5" long. The stem (or whatever it is called) that turns the sprocket wheel just sort of corroded and crumbled.

Hello I am looking for a part number for crank handle and the actual operating arm per the attached pictures below. This is what it looks like without the cover.

I have two windows needing replacement parts for R split arm crank mechanism probably installed in 1988 when the house was built. The only id seen is the logo Truth and a number 20810. Can you please help me find two of these parts?

It is stamped as Truth 45275. The arm is stamped with 40267. Total arm length about 9.5" 4.5" from the end to the bend in the arm. Thank you!

I need crank covers

Hi Swisco- I'm looking for 2 styles of Truth operators from the 90's. What makes them unique is that they they have a mounting base that is only 1 1/4" deep rather than the current entrygards that are over 2" deep. I will attempt to attach a couple of photos. I need left and right straight arms an ... (cont.)

We moved into an old house at least 80 years old the window cranks are broken. The picture hopefully should show you what you need and the name on the arm was entrygard truth. Thanks Ed

Our Wilmar wooden casement window (around 28 years old) won't close once opened. The device appears to be stripped. Wilmar is no longer in business. Have been told we need to replace the entire mechanism. Prefer bronze to match others. There are two arms connected to the device. Not sure wher ... (cont.)

The only markings I see are Semco on the crank handle and EntryGard on the crank arm. Hope that is enough to match. Thanks!

Hello, I am just looking for the cover for the crank mechanism. Thank you!

Entry guard truth. On the bottom arm there's 40754

Old marvi. Window. Open, but doesn't close. Do I need to replace the whole crank?

Hi, Hopefully this is enough information - the house was built in 1996 and I'll (likely) need either 5 or 6 of these - they are all the same size but different handedness. I'll do a complete inventory if you can help! There are tiny, hard to read numbers in the metal arms. If that is needed, let ... (cont.)

I need to replace several of these. They are in a Lindal cedar home built in 1987. Truth Hardware. Guessing these can be replaced with Truth 39-035 and 036? Can you confirm? Do you sell to homeowners directly?

I need what is shown in the photos

This operator is from a Wilmar casement window /stamped Truth. U.S. Pat 4,241,541. The long arm is stamped 30472RH. The short arm is stamped 30850. Thank you for your help.Best Regards,Evan

replacing the window crank - the arm mechanism and handle = entire unit Truth 20801/30841L Thanks

I need the window crank replacement parts. The Truth numbers are 30830, L30841, and 30843L.

I need four right and three left handle, crank for windows

Hi,I am hoping you can help me. I have a Crestline crank-out window from about 1992. When I am inside, it is on the right side. So, from what I read, I guess I need a left-side thingy! Anyway, the window will no longer open. The crank just goes around and around. I switched handles, but that did not ... (cont.)