Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Can I purchase it from you?21550. 45251. 3.

I'm looking to replace this operator. The crank out arm measures 9 inches Would you have this in stock and what color options for handle ? Thank you for this service,

window is 20x50". bow window has 4 separate window panes with the outside 2 windows that open and lock. I do not see any markings on these parts. I think I need to replace the crank arm and crank. The arm is 11 inches and I can not take a picture as the window will not open since it is broken. ... (cont.)

Number on the hardware (attached to window frame: 40942 (sitting flat on the frame) Photo 1: Shows the configuration of a crank assembly that is in good condition. Photo 2: Shows the severe corrosion / degradation of the hinge "arms"... about ready to fail. I've tried to look up what Shuco was ... (cont.)

Do you have these parts

Do you carry this Truth Window Hardware? Truth Entry Guard Main bracket has 40471 stamped on it One of the main linkage has 30842R stamped on it

I have windows that are striped out and not working. The handles will just open the window and when trying to close will just unscrew and come off. The look to be 9 1/2 arms only makings i can find is Somco. and a part number on the arm of 30744. Please help

Need split arm operator with pin stud and stud holder

Andersen 0P052020. Need for left and right including the handles. White.

It appears the crank is Truth brand 30710

I have over 30 windows that need this crank. Several of them do not grip, so I need to replace. Looking at the picture, do you have this model 45001. And any feedback will be appreciated.

At the bottom of the window (which appears to be controlled by 39-031 and/or 39-032 (I have two left windows and two right windows) there is a metal track and a guide that allows the bottom of the window to slide toward center as it opens. The guide and the track are both compromised on that one wi ... (cont.)

Handle sits on left of the casement.

Hi, I've got a customer that has sent me this photo for a casement operator to be replaced. I haven't taken the measurements yet, but I thought I'd check to see if the photo with the logo would be sufficient to find a suitable replacement. Thanks in advance. Andy

Casement window does not work Need a left hand mechanism

Dear Paul, I have Caradco windows throughout my property. On several of them Crank Handle (39-114) and Truth Operator Cover fell apart, exposing mechanisms. Any chance I could go ahead and replace just these two, without buying Caradco Window Crank (39-156)? Many thanks for your help. Cheers, Vl ... (cont.)

The shaft for the crank is broken at the gearing and will only open the window. Looking for a crank for the window that is at least 30 years old. The second photo is of the locking lever to help identify the window brand as there are no markings to be found on the window itself.

I also have a window that has Ashland printed on the window. The cranks are broke on all the windows. I cannot find one the looks or matches any numbers. i did however find the stud bracket that matches. #39-508. still need to find the crank though , any assistance would be greatly appreciated. as ... (cont.)

HelloMy folks bought this condo with 2 K&K casement windows. The crank is tough to wind and unwind. The plastic roller is broken and the rod or arm or whatever the part is called that pulls the window in and out keeps popping out of the window groove at the bottom. Replacing the window is cost p ... (cont.)

sorry for the poor picture but the width of the crank cover is 4 1/2 inches. I need 2 cranks and handles and will have a handy man install. thx, Jeff