Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Please see the attached photos. I'm looking for the Truth 24-45054 light beige round opening with tightening screw. Your part 39-114L Truth 21-45240 spline is too shallow and has wings. Thank you for your help! Dan Stack

These older handles are getting very loose and I was wondering if they make any replacements for them or if we have to replace the whole crank system. the plastic bushings where the cranks go in have worn some but the metals on the crank and unit are ok. You can still wind them open and shut but the ... (cont.)

Hi, I'm attempting to replace the hinge pictured. I purchased 39-155 but the pivoting length of the upper arm was too short. Everything else seemed to be the same

Distance between holes 31 inches width of base 5 inches I can be reached by phone at 607-592-4892 thank you

Do you have a repplacement for this operator that is available in gold or bronze?

I have two windows that are aprox 25 years old. The window crank housing has broken off of both. I have attached pictures of both. I need to replace both of them.

I have an Aradco operator with a crank with the number 45045 printed inside of the back portion of the crank. I would like to replace the crank. It looks like the bore is 11/32 (that the closest size drill bit that fits). Thanks for any help you can provide.

Hello, I have Pozzi windows that are 25 years old. I need to replace several of the crank mechanisms and want to make sure I order the correct ones. The picture of my window looking at the window from inside the house I would imagine it would be a left side crank. Yet the part photo attached has a ... (cont.)

New crank for window whole mechanism. New tab to till window out. Doesn't lock in properly. New springs so window stays open.

What is this?

Hi, I am trying to get two of these in white. The ones I got from you were the wrong ones. Can you help me decide which is the right one?Thanks in advance!Marianna

can't find Truth casement split arm operator right hand in white, with 3 hole base, that has operator arm 40395 and split arm 30866.

I'm in search of the crank mechanism and arms for a Vetter casement window. The teeth on the drive gear are stripped. Hoping you can help.Thanks,Roger

I am looking for a replacement for an Eagle awning window is as a number S-1081-62 on arm Do you carry this part? Thank you for your help on this. Best, Mark

We have a 1958 house full of casement windows with window operators that are wearing out. Unfortunately I haven't found any replacement parts. I've uploaded two photo's of the operator. The words Anderson and RH are on the bottom side. Due you have any replacement parts or can direct me to a locat ... (cont.)

On the arm there is a marking TRUTH. If you view the photos sent there is also serial numbers. Mine is broken. I am hoping you have replacement part. Finally let me know price and availability. Thank YouAfter viewing the operator on the left, I feel that I should replace both of them. I would need b ... (cont.)

The only identification I have is on the inside of the glass caradco 1974. Then the a on the window crank says Truth.

Have customer with 9 Simonton tilt in double hung. Property build 2006. Need balances, shoes and pivot bars. Also have Simonton casement. need operator

I need tboth the right-hand and left-hand cranks and handles

I need one left and one right hand crank window arm kit. The 5.5 inch white thing that the handle screws onto are stripped and so the white thing won't stay tight to the window. the arm is about 5.5 inches. I need the kit that includes the white part that you see inside the house and the arms tha ... (cont.)