Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Greetings, I'm trying to locate some replacement hardware for a window. Its a bit unusual as ive never seen a casement set up this way, i actually think it might be an awning window installed sideways. What would be the best way to find a replacement crank arm assembly?

Hi, I'm looking for Truth Awning Operator 30896 substitute. Thanks

Measurements straight 10 3/4 2nd 4 -7/16 and 3-7/8 Need 2 Right and 2 Left and 4crank handles .

Need a new entry bar right side 6 white covers

9"straight arm 3" / 4" pivot arm

Hi! This window crank appears to have a handle that is stripped. The handle will push the window out, but it won't retract it back in. Do you sell these parts and what should I buy to fix this? Thanks! Anil.

Main arm about 9". Track on window about 11 1/4". can you identify now or do i need the hardware off picture

Truth Entry Gard Window operator Hinge on right I need two

I need a replacement operator for a 30 year old Weather Shield casement window. I checked with Weather Shield and, they longer carry this replacement, and was given Swisco as a third party supplier. As can be seen in the photo the Part No. stamped on the arm is 31850. It appears your Truth Dyad O ... (cont.)

I'm looking for a replacement for this operator. Looks like a Truth 3063 but I can't find that number.

Hoping to find a replacement for the hinge in the picture. The results I found online don't match what's in the photo, even though they seem to have the same part number. The one I currently have has a curved arm attached to the railing. Any help would be greatly appreciated.

I need the "bushing" for this operator. (30" X 23" window)

Hi this handle was missing when we bought the house. Most of the other windows are Pella but this one has no identifying info. Any idea what we need? Previous owners put hooks and eyes in the frame to hold it shut rather than fix it

Hi. I recently moved into a new place and several of the windows do not function properly. Some of the cranks do not function at all, some of them will open the window but will not close the window, most of them come apart when trying to use them. The handles themselves seem to be fine and the mecha ... (cont.)

Hello, the window cranks out but not in. Are you able to help me identify the part's replacement by any chance? Thank you so much.

Hi there - looking for replacement parts for the operator. One part says "truth 30905" on it. Do I also need to replace the triangle it connects to? (see picture 4). Thanks for your help

Hi, I work in purchasing for a construction company in Hawaii. I was asked to find a replacement for a Pozzi window crank. I don't have much information other than the brand and the photos. I could ask the foreman though if you have any specific questions.

These are pics of the window operator we discussed and pertains to a right swing casement window. Arm lengths are 8 inches each. I need to replace two operators and the control handles, as the gears have stripped. Appreciate your help in acquiring the appropriate replacement window operators. ... (cont.)

Hi. Looking to replace this defective window crank. There are three or four that I will eventually need to replace.

I'm guessing that the originals are no longer manufactured. It looks like there are a few possible options on your wesbite, but hard to tell which would work if at all