Viewing all customer Discussions for:

39-140 Dual Arm Crank, 16"

Wanting to replace a few of these awning window operators and sash hooks. Sash hook stamped 31336Main operator unit stamped 235597Stamps on the operator arms 30896, 31254, 31255Any help finding the correct operator replacement for my awning windows would be greatly appreciated.Mahalo,AnthonyWailuku, ... (cont.)

Hope you can help. No photo of this installed as I had already removed it.

The photos above show the "ring nut" that does not stay in place when I crank the window closed. The crank "driver" mechanism (photo 1) is held in place using this "ring nut" screwed securely into the crank fitting (photo 5) to hold it snuggly in place (photo 4). Since the ring nut is old and threa ... (cont.)

need new operators for these 2 awning windows, handles and shafts missing. Home was built in 1990. many other casements also have stripped knurled sleeves and the worm drive retract when closing the windows. Can I get some pricing on these replacement parts? Thank you Scott

It is coming out.

Operator is stripped It measures 5" inside

Hi- my daughter purchased a house recently and one of the awning window operators is shot. I can't identify the window manufacturer or the operating hardware- no markings though they may be on the underside and I'd have to remove it to see. Whether it is Truth or other, I need to find a suitable ... (cont.)

Hello I need parts for this window. Can you identify the maker by these pictures? I need the scissors opening mechanisms

I tried really hard to read the numbering I tried to take a picture of all I can tell is it seems to say the word Canada and a four digit number with 18 in it

I need to replace the operator on a couple awning windows. The photos show the operator installed. Each section of the crank arms are approximately 9" long. The windows were purchased through Sears about 37 years ago. In looking at your awning window hardware on your website I found PN 39-0837. ... (cont.)

Hello, I have added pictures of the parts I need but once I add them, I cannot seem to get back to this webpage. If you could send me an email, I could send you pictures of what I need. This is for a casement window and the casing I believe needs to be replaced because the threads that the crank mec ... (cont.)

Hello, I'm looking for help identifying this. It's about 10-11 inches fully extended. Do you have this part?

#0490 is how the mechanism attached to the window #448 & #449 how the Mechanism attaches to the window frame Crank broke away from the mechanism Thank you

This arm when fully closed is 16 inches

For A Window Wizard 23" x 28" awning window with 16-1/8" Truth operator with numbers 31109 & 31110 on the arms

Thank you

Hi, I need to purchase some replacement parts for my 2 older model Weather Shield awning style windows. I need new cranks and the part the crank screws into. The elbow part of the mechanism is fine. I'm uploading some photos for identification. Thank you!

This is a Truth. Body #45206, inside arms say #40510 and 40511, and outside arms both say 30895A. Do you have this part?

Please give me a call when you get a chance. Thanks Ken

I need an operator for a 2/0 Hurd Awninh window with a 10 inch extension center mount in white or bronze