Viewing all customer Discussions for:

39-140 Dual Arm Crank, 16"

Looking for replacement crank assembly and handle. Manufacturer unknown.

Hi. Two of my operators have failed due to the bushings pushing out of the body of the operator. Photos are attached. The part number appears to be 45301. Do you sell a replacement part? Thanks, Chris

Aloha! Im the second owner of a Lindal cedar home in Kula, Maui, Hawaii. I have three window cranks I'd like to replace. The photos I included show the two that are similar, just open opposite directions. Please let me know if you need additional photos to determine what replacements I need. Th ... (cont.)

I have a contemporary 1980's built home with many crank style windows. Many of the circular crank center pieces are broken and will not open or close the windows. What is the correct style and replacement for these cranks, please. I am attaching two photos. Do I need to purchase the whole replace ... (cont.)

Home was built in 1994/95 with all caradco windows. The pictured window is a bathroom window that kicks out. The nut that holds the winder is stripped and won't hold the mechanism in place while turning the butterfly crank and the window won't close all the way. Can you help me fix or replace th ... (cont.)

I am trying to fix this window crank. The handle with gear keeps coming out. I am assuming that the entire crank assembly needs replacing. Please advise.

This is Truth Hardware. Arms are just over 16" and have number 30896. They attach to a part number 45142, shown in picture W 2, that has 5 screw holes. It fits through an opening that is 4 5/8". The hinges click onto a part that is 3 "long--picture 3.

Good afternoon! Would you be able to recommend replacement parts for me? I wasn't able to find any markings on the hardware itself and don't have a name brand for the windows. Thanks :-)

Looking for 2 each of the attached Truth Window Crank part number stamped on my window crank is 40510 and 40511

I am looking for the replacement handle and spindle for a Truth 45206 window hinge. Is this something you carry or can help me locate? Any help is greatly appreciated. This is for an area that has limited funding so I am trying to keep from having to replace the entire assembly.

Hello, I'm looking to replace the window crank because the "guts" do not stay in when cranking the window open or closed. Can you please let me know if this is something you have available or if you need additional information from me.Thank you,Ric

Hi, I was looking for help to replace the window parts I have uploaded. No names or numbers could be located on any of the existing hardware. Thank you for your assistance! Ed

looking to replace the crank mechanism on Marvin window. Do you know where I can purchase? Thank you Judy

Hi, I called MW manufacturing (now PlyGem). They told me the awning window used Truth hardware and was dual arm. I need some help identifying exactly what operator (and I will probably buy a new handle, as well) I should buy. Thank you! Mel

Hello, I have three of these windows and I need replacement parts for all three including the crank handle. Please advise-Paul

Windows are Alside U1000, circa late '90's. Straight cranks protrude too far and interfere with blinds. Crank is 3 1/16" L. Looks like 40085 stamped inside. Attaches to window with 12 splines and set screw. Dia. across splines is approx. 0.326". I was looking at Truth 39-205, but don't know if splin ... (cont.)

This window is above the bathtub in the master bath. Unlike regular windows that swings left/right, this window goes down( closed position) and as you crank the handle it opens up. The crank handle has name "SealRite" written on it. Looking to replace this crank since does not work. One of the contr ... (cont.)

I installed two of the Bright Brass Operator Covers (39-322) for the casement windows and they look great.The two casement windows are Eagle (Eagle was purchased by Anderson) and are part of a Bay Window ? two casement and one awning window ? the Awning Window is also Eagle.The brass awning mechanis ... (cont.)

Winder keeps pushing out when closing window

The crank on our awning window doesn't operate - crank won't catch internally and just spins loosely inside the slot. It looks like the previous owner did a DIY fix by drilling partway through the mechanism but if that worked at one point, it doesn't anymore. I think we may need to replace the whole ... (cont.)