Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Please advise if you have these exact systems for replacement. Long arm is 9 1/2 ". Crank base is 4" wide and 1.5 " deep. Need it for left opening window as well as right opening window. ( Pict.# 2916, 2917 ). Part # 20810 The 3rd window are pict. #2918, 2919, 2920. (9 1/2" long arm. Base5") ... (cont.)

Need replacement hardware for sw casement entry gard Sarah

45273 crank mechanism, L31539 short curved arm about 3 1/4 inches, 20748 connecting arm about 3 inches, bar on sash is 11 3/8 inches, stainless guide is about 10 inches.Main arm is about 9 1/2 inches long.

i need help identifying this window crank. this is the right window and the left is one is missing. previous tenants broke it and tossed it

Looking for this part for a 10 years old Marvin casement window. The handle is a non folding handle (the new cranck have a folding handle. I am not sure if the cranks are the same or the older ones (the ones I have) are different.On the arm it stamped: Truth 40754 R

For the duel replacement cranks is there a right and a left ?

Hi, I believe these were on our Scherer Brothers Windows here in Minnesota. It just says Truth Hardware on it with no number. These are plastic and cover the mechanism that opens and closes the windows. Thanks for any help you can give me.

Brand name of the window is Marvin, window are casements, windows are 30 years old.Brianwindows crank assembly is broken , windows do not openMarvin windows will not help us on this, i have contacted my rep.

Good morning,I would like to replace the current cranks shown in pictures with new cranks. The current brand is Loewen and were electric windows. We are going away from the electric windows and going back to hand cranking them. The only problem is that these windows are 12 feet off the ground so I n ... (cont.)

Here are a few more photos with info, Entry Guard Truth 30842R 20810 Need part for Vetter window

Vetter window. Need parts

The number stamped on the operator is #R30842 and L30841. i need 2 lefts and 1 right. Thanks Doug

I'm trying to locate a Marvin handle that attaches to a Truth operator with code 20810a as in the picture. Could you please help ? Thanks.

On the final arm (silver in color) is stamped 20544. On the underside of the bent or angled arm that connects with the final arm is stamped 30636. On the long brass-colored arm that goes to the bottom of the window is stamped 30470LH. On the brass-colored half circle canopy that is at the base of th ... (cont.)

Good Morning, Can you please let us know which parts we need to order from your site? We are replacing all the parts seen in the pictures included. Thank you!

One leaf of French Casement window does not operate properly, or operates with difficulty. I have tried to tighten the handle's grip on the turning mechanism but that only helps for short period of time if at all. Maybe treads are stripped. Window will close if pulling on frame while turning crank. ... (cont.)

Need the track/ guides for newer replacements Also the pin that mounts on window sash for the short arm

I need the left hand not this phot of right hand Thanks John

Looking for replacement window cranks for K & K casement windows. Need one set for left opening and one for right opening, plus the covers and handles. One of arms says #20810. I think I need 39-155 and 39-156 for the arms. Just wanted to verify with you prior to placing the order.Thanks so ... (cont.)

Entry gard Truth The part I would like to replace is the bottom rusted bar that is attached to a track under the window sash. The bar is 5 inches and the track under the window sash is 7 inches. Thanks!